Abstract:Aim: The aim of this study was to evaluate the finite element analysis (FEA) approach to assess biomechanical performance of individual endoprostheses used in the reconstruction of extensive mandibular defects, and to explore an available strategy for the optimal design of prostheses.Material and methods: A female patient experienced fracture of a titanium mandibular endoprosthesis one year after reconstructive surgery. The endoprosthesis was placed during resection of a mandibular carcinoma. Using CT data, a finite element analysis (FEA) of the implant was performed to identify potential causes for this mechanical failure. Based on the first FEA analysis, modifications of the prosthesis geometry and screw configuration were carried out. FEA was performed for each subsequent modification until no stress concentration areas were identified. The final version of the titanium prosthesis was implanted during the second mandibular reconstruction.Results: The FEA model was constructed, based on the geometrical data of the patient. Two areas of stress concentration were identified in the original prosthesis:- at the top surface of the left stem, 1.5 cm away from the corner (the peak stress was 616 MPa) and- on the exterior surface of the right stem, close to the mandibular stump margin.The mechanical failure occurred at the top surface of the left stem. Some common characteristics of the biomechanical performance were noted in the two models, but lower overall stress was achieved in the second, optimized prosthesis. By thickening the recognized high stress areas, and attenuating those areas subject to less stress, then adopting a quadrilateral screw configuration, this dispersed the stress more evenly in the optimized endoprosthesis. Function in the optimized reconstructed mandible was observed for 3 years without significant endoprosthesis related complication.Conclusion: In some patients with extensive mandibular defects, the individually tailored endoprosthesis constructed with regard to minimizing stress concentration using this method seems to have a place. The prosthesis geometry and screw configuration influence the stress strain distribution on the reconstructed mandible. Our FEA approach can optimize the design of individual endoprostheses and give the reconstructed mandible improved biomechanical performance. (C) 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Optimal Design of an Individual Endoprosthesis for the Reconstruction of Extensive Mandibular Defects with Finite Element Analysis.

[Application of Computer Aided Design-Computer Aided Manufacture Technique in Mandible Defect Reconstruction with Individual Titanium Prosthesis].

The Design and Biomechanical Evaluation of Individual Mandibular Prosthesis

Model-based biomechanical dental implant optimization in bone-implant system

A Novel Conceptual Design of a Biomimetic Oral Implant and Its Biomechanical Effect on the Repairment of a Large Mandibular Defect

Design Criteria for Patient-specific Mandibular Continuity Defect Reconstructed Implant with Lightweight Structure using Weighted Topology Optimization and Validated with Biomechanical Fatigue Testing

Design And Biomechanical Analysis Of A Novel Mandibular Prosthesis

Design and biomechanical evaluation of lateral mandibular prosthesis

Mechanobiologically optimization of a 3D titanium-mesh implant for mandibular large defect: A simulated study

Validation of Low Cost Patient Specific Implant Design Using Finite Element Analysis (FEA) for Reconstruction of Segmental Mandibular Defects: A Case Report and Literature Review

Biomechanical Analysis of Computer Aided Individualized Functional Reconstruction of Mandible Defect by 3D FEA

An Individually Designed Custom-Made Mandibular Condyle Prosthesis Using Selective Laser Melting: Finite Element Analysis

Establishment of Sequential Software Processing for a Biomechanical Model of Mandibular Reconstruction with Custom-Made Plate.

[Reconstruction of Mandibular Bone Defects Using Three-Dimensional Skull Model and Individualized Titanium Prosthetics from Computer Assisted Design].

Failure location prediction by finite element analysis for an additive manufactured mandible implant

Three-dimensional Finite-Element Analysis Investigating the Biomechanical Effects of Human Mandibular Reconstruction with Autogenous Bone Grafts

Designing and Finite Element Analysis of customized titanium plate for Mandible

Biomechanical finite element analysis of short-implant-supported, 3-unit, fixed CAD/CAM prostheses in the posterior mandible

Biomechanical Evaluation of a Customized 3D-Printed Polyetheretherketone Condylar Prosthesis

Biomechanical analysis comparing natural and alloplastic temporomandibular joint replacement using a finite element model

Finite Element Assessment of a Novel Patient‐Specific Mandibular Implant for Severely Atrophic Ridge