Abstract:Aim: The aim of this study was to evaluate the finite element analysis (FEA) approach to assess biomechanical performance of individual endoprostheses used in the reconstruction of extensive mandibular defects, and to explore an available strategy for the optimal design of prostheses.Material and methods: A female patient experienced fracture of a titanium mandibular endoprosthesis one year after reconstructive surgery. The endoprosthesis was placed during resection of a mandibular carcinoma. Using CT data, a finite element analysis (FEA) of the implant was performed to identify potential causes for this mechanical failure. Based on the first FEA analysis, modifications of the prosthesis geometry and screw configuration were carried out. FEA was performed for each subsequent modification until no stress concentration areas were identified. The final version of the titanium prosthesis was implanted during the second mandibular reconstruction.Results: The FEA model was constructed, based on the geometrical data of the patient. Two areas of stress concentration were identified in the original prosthesis:- at the top surface of the left stem, 1.5 cm away from the corner (the peak stress was 616 MPa) and- on the exterior surface of the right stem, close to the mandibular stump margin.The mechanical failure occurred at the top surface of the left stem. Some common characteristics of the biomechanical performance were noted in the two models, but lower overall stress was achieved in the second, optimized prosthesis. By thickening the recognized high stress areas, and attenuating those areas subject to less stress, then adopting a quadrilateral screw configuration, this dispersed the stress more evenly in the optimized endoprosthesis. Function in the optimized reconstructed mandible was observed for 3 years without significant endoprosthesis related complication.Conclusion: In some patients with extensive mandibular defects, the individually tailored endoprosthesis constructed with regard to minimizing stress concentration using this method seems to have a place. The prosthesis geometry and screw configuration influence the stress strain distribution on the reconstructed mandible. Our FEA approach can optimize the design of individual endoprostheses and give the reconstructed mandible improved biomechanical performance. (C) 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Design And Biomechanical Analysis Of A Novel Mandibular Prosthesis

Application of CAD/CAM Techniques in Mandible Large-Scale Defect and Reconstruction with Vascularized Fibular Bone Graft

[Application of Computer Aided Design-Computer Aided Manufacture Technique in Mandible Defect Reconstruction with Individual Titanium Prosthesis].

[Application of Computer Aided Design/computer Aided Manufactured Techniques in Mandible Defect Reconstruction].

Design and Biomechanical Evaluation of a Custom Lateral Mandible Titanium Prosthesis

The Design and Biomechanical Evaluation of Individual Mandibular Prosthesis

Design and biomechanical evaluation of lateral mandibular prosthesis

A Novel Conceptual Design of a Biomimetic Oral Implant and Its Biomechanical Effect on the Repairment of a Large Mandibular Defect

3D-Printed PEEK Implant for Mandibular Defects Repair - a New Method.

Design and 3D printing of integrated bionic porous ceramic maxillofacial prosthesis

Biomechanical Evaluation of Reconstruction Plate for Fixation of Mandibular Prosthesis

[The Design and Biomechanical Evaluation of Implantation on the Mandibular Defect Reconstructed with Rib Graft].

Design Criteria for Patient-specific Mandibular Continuity Defect Reconstructed Implant with Lightweight Structure using Weighted Topology Optimization and Validated with Biomechanical Fatigue Testing

Establishment of Sequential Software Processing for a Biomechanical Model of Mandibular Reconstruction with Custom-Made Plate.

Optimal Design of an Individual Endoprosthesis for the Reconstruction of Extensive Mandibular Defects with Finite Element Analysis.

Mechanobiologically optimization of a 3D titanium-mesh implant for mandibular large defect: A simulated study

The Design for Biomechanics Mandible Prosthesis and It's Evaluation on Biomechanics

Biomechanical Analysis of Computer Aided Individualized Functional Reconstruction of Mandible Defect by 3D FEA

Biomechanical Behavior of the Three-Dimensionally Printed Surgical Plates for Mandibular Defect Reconstruction: a Finite Element Analysis

Biomechanical analysis of mandibular defect reconstruction based on a new base-fixation system

[Reconstruction of Mandibular Bone Defects Using Three-Dimensional Skull Model and Individualized Titanium Prosthetics from Computer Assisted Design].