Abstract:Aim: The aim of this study was to evaluate the finite element analysis (FEA) approach to assess biomechanical performance of individual endoprostheses used in the reconstruction of extensive mandibular defects, and to explore an available strategy for the optimal design of prostheses.Material and methods: A female patient experienced fracture of a titanium mandibular endoprosthesis one year after reconstructive surgery. The endoprosthesis was placed during resection of a mandibular carcinoma. Using CT data, a finite element analysis (FEA) of the implant was performed to identify potential causes for this mechanical failure. Based on the first FEA analysis, modifications of the prosthesis geometry and screw configuration were carried out. FEA was performed for each subsequent modification until no stress concentration areas were identified. The final version of the titanium prosthesis was implanted during the second mandibular reconstruction.Results: The FEA model was constructed, based on the geometrical data of the patient. Two areas of stress concentration were identified in the original prosthesis:- at the top surface of the left stem, 1.5 cm away from the corner (the peak stress was 616 MPa) and- on the exterior surface of the right stem, close to the mandibular stump margin.The mechanical failure occurred at the top surface of the left stem. Some common characteristics of the biomechanical performance were noted in the two models, but lower overall stress was achieved in the second, optimized prosthesis. By thickening the recognized high stress areas, and attenuating those areas subject to less stress, then adopting a quadrilateral screw configuration, this dispersed the stress more evenly in the optimized endoprosthesis. Function in the optimized reconstructed mandible was observed for 3 years without significant endoprosthesis related complication.Conclusion: In some patients with extensive mandibular defects, the individually tailored endoprosthesis constructed with regard to minimizing stress concentration using this method seems to have a place. The prosthesis geometry and screw configuration influence the stress strain distribution on the reconstructed mandible. Our FEA approach can optimize the design of individual endoprostheses and give the reconstructed mandible improved biomechanical performance. (C) 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

The Design and Biomechanical Evaluation of Individual Mandibular Prosthesis

[Application of Computer Aided Design-Computer Aided Manufacture Technique in Mandible Defect Reconstruction with Individual Titanium Prosthesis].

Application of CAD/CAM Techniques in Mandible Large-Scale Defect and Reconstruction with Vascularized Fibular Bone Graft

[Application of Computer Aided Design/computer Aided Manufactured Techniques in Mandible Defect Reconstruction].

Design And Biomechanical Analysis Of A Novel Mandibular Prosthesis

Design and biomechanical evaluation of lateral mandibular prosthesis

Design and Biomechanical Evaluation of a Custom Lateral Mandible Titanium Prosthesis

[Reconstruction of Mandibular Bone Defects Using Three-Dimensional Skull Model and Individualized Titanium Prosthetics from Computer Assisted Design].

Biomechanical Analysis of Computer Aided Individualized Functional Reconstruction of Mandible Defect by 3D FEA

Optimal Design of an Individual Endoprosthesis for the Reconstruction of Extensive Mandibular Defects with Finite Element Analysis.

A Novel Conceptual Design of a Biomimetic Oral Implant and Its Biomechanical Effect on the Repairment of a Large Mandibular Defect

[The Design and Biomechanical Evaluation of Implantation on the Mandibular Defect Reconstructed with Rib Graft].

Reconstruction of Mandibular Defect by Using Titanium Mandibular Prosthesis:A Preliminary Experimental Study

A Study on Computer Aided Development of Individualized Titanium Mesh with Dental Implant for Functional Reconstruction of Mandible Defect

Mechanobiologically optimization of a 3D titanium-mesh implant for mandibular large defect: A simulated study

Potential New Method of Design for Reconstruction of Complicated Mandibular Defects: a Virtual Deformable Mandibular Model.

The Design for Biomechanics Mandible Prosthesis and It's Evaluation on Biomechanics

Research on 3D Modeling Technology of Craniofacial Implants Based on Topology Optimization Method

Establishment of Sequential Software Processing for a Biomechanical Model of Mandibular Reconstruction with Custom-Made Plate.

[Study of Biomechanical Effects on the Reconstruction of Mandible Defect with Autogenous Bone Grafts].

An Individually Designed Custom-Made Mandibular Condyle Prosthesis Using Selective Laser Melting: Finite Element Analysis