Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Study on DEM technique

DEM technique: A new three-dimensional micro fabrication technique for non-silicon materials

Dem Microfabrication Technique And Its Applications In Bioscience And Microfluidic Systems

Development Of Micro Flowmeters And Microlenses Using A New 3d Microfabrication Technique-Dem Technique

Metal Microstructure Microfabrication Technique

The Study of Flexible Micro-Patterning

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

MOEMS 3D microstructure preparation method based on novel localized electrochemical deposition

Three-dimensional micro-fabrication on copper and nickel

Study on Micro Reversible Electrical Discharge Machining Method for the Fabrication of Micro Structures

A New Fabrication Method for 3D Multilayer Microstructure

Study on Silicon Deep Wet Etching Technology for MEMS

Study on X-Ray Deep Lithography Process in LIGA Technique

Excimer Laser Deep Micro-Structuring for Liga Process

Fabrication of Large Scale Bi-layer Microstructure through Electrochemical Nanoimprinting

Etching-assisted Femtosecond Laser Microfabrication

Fabrication of Micro Structure Using EDM Deposition

Three Dimensional Micromachining on Aluminum Surface by Electrochemical Wet Stamping Technique

Study on Feasibility of Integration of Micro Stereo Lithography and LIGA

Micro sinking electro-discharge machining of complex 3D micro-cavity using in-situ milled graphite microform electrode

Multi-layer Microstructure Fabrication by Combining Bulk Silicon Micromachining and UV-LIGA Technology