Abstract:This paper made a revisit on the contact behavior and application of a beam (rail) on a half-plane/half-space. It is found that when the beam is subjected to a concentrated force, the shear deformation of the beam must always be considered, because the deformation only occurs within a limited length of the beam. The second finding of this paper is that the reactions and the surface settlements of the half-plane/half-space are significantly affected by the load position on the cross-section of the beam (on the top of rail in the concerned areas of application) and must be considered in practice. The Flamant/Boussinesq solutions are used to establish integral equations for the surface settlement of the half-plane/half-space below the beam. The Fourier Transform is applied to the first derivative of these integral equations and to the differential equations of the Timoshenko beam. Solving these two equations and employing the inverse Fourier Transform, the deflection and the reaction can be obtained in a compact format. After dispersing the wheel pressure on top of the rail to the centroid, the deflection and reaction are in agreement with the finite element analysis. Finally, simplified equations for equivalent bearing lengths are proposed. Nonuniform distribution of the reactions along the width of the beam is treated by using an equivalent uniform width. If the shear deformation is ignored, the problem becomes the classic one solved by Biot (J Appl Mech 4:A1–A7, 1937). Compared with Biot solution, the current way of solution is compact, their minor differences are the characteristic length. The current solution is a fourth root while the Biot solution is a cube root.

Load-deflection relations of T-section rails under lateral loads | Charakterystyki obcia̧żeniowo-odksztalłceniowe szyn o przekroju teowym poddanych obcia̧żeniom poprzecznym

Load-deflection relations of T-section rails under lateral loads

Springback after the Lateral Bending of T-Section Rails of Work-Hardening Materials

Load-stroke Model for Straightening the Warpage of T-rail

Model of Straightening T-rail Based on Elastic-Plastic Theory

Residual Stress Distributions in Elevator Guide Rail Straightening

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Two-dimensional Bending Springback Analysis and Test of T-rail

ELASTIC FLEXURAL-TORSIONAL BUCKLING OF C-PURLIN AND Z-PURLIN

Modeling, simulation and experiment for straightening lateral bending of elevator guide rail

STUDY ON SOME KEY PROBLEMS RELATED TO CRANE BEAM-RAIL SYSTEM UNDER WHEEL PRESSURE

On stress and deformation accumulation of continuously welded rails under cyclic thermal loading in high-speed railways

Dynamic Analysis of a Slab Track on the Poroelastic Soil Subjected to Moving Loads

Contact Behavior Between Rail and Elastic Foundation

FEM ANALYSIS ON THE ELASTO-PLASTIC PERFORMANCE OF THREE-POINT-BEND SPECIMENS OF RAIL STEEL

Analysis of fatigue crack propagation in rails under combined action of wheel load and residual stress

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

An elastic-plastic theoretical analysis model of wheel-rail rolling contact behaviour

A new model for analyzing nonlinear torsion behavior of concrete filled steel tube columns with rectangular section

Dynamic mechanical behaviors of pearlitic U71MnG rail steel: Deformation mechanisms and constitutive model