Abstract:“Blind holes” are the main reasons for the reduced performance of microgas sensor carriers. To improve the “blind hole” of catalytic combustion methane sensors and therefore, their thermal stability, this study presents a numerical simulation of the catalytic combustion in an Al2O3− oriented ceramic array involving porous microthermal plates. A three-visualization model of the sensor is established using the FLUENT software, and the simulation results are systematically analyzed based on the dynamics and thermodynamic mechanism of the microgas sensor. The results show that the regularity of the surface reaction presents a circular distribution, with the center line of the channel serving as the axis symmetry. The total reaction velocity in the array hole increases gradually from the inlet to the outlet. The flow velocity at the inlet should be controlled at more than 1 × 10−8 m/s, which is more accurate compared with the concept of “uniform velocity” in previous studies. The optimum pore size at the inlet should be 150 nm, and the inner pore size of the wall should be slightly higher than 300 nm, which is a more careful division compared with previous pore-size studies. The efficient reaction position is from the inlet to the quarter of the hole. The simulation results make up for the deficiencies in the analysis of the process parameters of the methane sensor carrier array hole and the internal reaction change process, as well as provide innovative comments on the sensor structure design. Through digital simulations, the limitations associated with the experiments can be avoided, the theoretical study can be improved, theoretical support can be provided for experiments related to the improvement of thermal stability, the predictability of experiments can be improved, and the feasibility of the research proposal can be verified. These steps are important for the improvement of the “blind hole” problem of catalytic combustion methane sensors.

Highly sensitive methane catalytic combustion micro-sensor based on mesoporous structure and nano-catalyst.

A low power catalytic combustion gas sensor based on a suspended membrane microhotplate.

One-pot synthesis of uniform mesoporous rhodium oxide/alumina hybrid as high sensitivity and low power consumption methane catalytic combustion micro-sensor

Behaviour of a catalytic combustion methane gas sensor working on pulse mode

An Ultra Low Power Consumption Methane Gas Detector Based on an Optimized Suspended Membrane Microhotplate

A Catalytic Sensor Using Mems Process For Methane Detection In Mines

Numerical Simulation of Catalytic Methane Combustion in Al2O3 Directional Nanotubes Modified by Pt and Pd Catalyst

Highly Sensitive Methane Sensors Based on Pd/Hms and Pd/Sba-15 Composite Prepared by Homogeneous Deposition-Precipitation Method

Mesoporous PdO/Pt/Al2O3 film produced by reverse-micro-emulsion and its application for methane micro-sensor

High Performance Methane Sensors Based on Pd/SBA-15 Composite Prepared by Homogeneous Deposition-Precipitation Method

Design and Experimentation with Sandwich Microstructure for Catalytic Combustion-Type Gas Sensors

Enhanced Sensing Performance Of Catalytic Combustion Methane Sensor By Using Pd Nanorod/Gamma-Al2o3

Enhanced sensing performance of catalytic combustion methane sensor by using Pd nanorod/γ-Al2O3

Pt‐Pd Nanoalloys Functionalized Mesoporous SnO2 Spheres: Tailored Synthesis, Sensing Mechanism, and Device Integration

High Efficient Mesoporous Co3o4 Nanocatalysts for Methane Combustion at Low Temperature

Microstructure Methane Sensor Based on Pd-doped SnO2 Nanoparticles

Synthesis of Pd-loaded Mesoporous SnO2 Hollow Spheres for Highly Sensitive and Stable Methane Gas Sensors

Experimental Study on Enhanced Methane Detection Using an MEMS-Pyroelectric Sensor Integrated with a Wavelet Algorithm

Innovative Thermocatalytic H2 Sensor with Double-Sided Pd Nanocluster Films on an Ultrathin Mica Substrate

Fast-Response, Sensitivitive and Low-Powered Chemosensors by Fusing Nanostructured Porous Thin Film and IDEs-Microheater Chip

CeO2:Mn3O4 Catalytic Micro-Converters Tuned for CH4 Detection Based on Catalytic Combustion under Real Operating Conditions