Abstract:“Blind holes” are the main reasons for the reduced performance of microgas sensor carriers. To improve the “blind hole” of catalytic combustion methane sensors and therefore, their thermal stability, this study presents a numerical simulation of the catalytic combustion in an Al2O3− oriented ceramic array involving porous microthermal plates. A three-visualization model of the sensor is established using the FLUENT software, and the simulation results are systematically analyzed based on the dynamics and thermodynamic mechanism of the microgas sensor. The results show that the regularity of the surface reaction presents a circular distribution, with the center line of the channel serving as the axis symmetry. The total reaction velocity in the array hole increases gradually from the inlet to the outlet. The flow velocity at the inlet should be controlled at more than 1 × 10−8 m/s, which is more accurate compared with the concept of “uniform velocity” in previous studies. The optimum pore size at the inlet should be 150 nm, and the inner pore size of the wall should be slightly higher than 300 nm, which is a more careful division compared with previous pore-size studies. The efficient reaction position is from the inlet to the quarter of the hole. The simulation results make up for the deficiencies in the analysis of the process parameters of the methane sensor carrier array hole and the internal reaction change process, as well as provide innovative comments on the sensor structure design. Through digital simulations, the limitations associated with the experiments can be avoided, the theoretical study can be improved, theoretical support can be provided for experiments related to the improvement of thermal stability, the predictability of experiments can be improved, and the feasibility of the research proposal can be verified. These steps are important for the improvement of the “blind hole” problem of catalytic combustion methane sensors.

One-pot synthesis of uniform mesoporous rhodium oxide/alumina hybrid as high sensitivity and low power consumption methane catalytic combustion micro-sensor

A low power catalytic combustion gas sensor based on a suspended membrane microhotplate.

Highly sensitive methane catalytic combustion micro-sensor based on mesoporous structure and nano-catalyst.

An Ultra Low Power Consumption Methane Gas Detector Based on an Optimized Suspended Membrane Microhotplate

Mesoporous PdO/Pt/Al2O3 film produced by reverse-micro-emulsion and its application for methane micro-sensor

A Catalytic Sensor Using Mems Process For Methane Detection In Mines

Mesoporous amorphous Al2O3/crystalline WO3 heterophase hybrids for electrocatalysis and gas sensing applications

Pt‐Pd Nanoalloys Functionalized Mesoporous SnO2 Spheres: Tailored Synthesis, Sensing Mechanism, and Device Integration

Rh2O3/mesoporous MOx-Al2O3 (M = Mn, Fe, Co, Ni, Cu, Ba) catalysts: Synthesis, characterization, and catalytic applications

Rh2O3/mesoporous MO -Al2o3 (M = Mn, Fe, Co, Ni, Cu, Ba) Catalysts: Synthesis, Characterization, and Catalytic Applications

Numerical Simulation of Catalytic Methane Combustion in Al2O3 Directional Nanotubes Modified by Pt and Pd Catalyst

Tailoring Pd/M@CoAlO Core-Shell Catalyst Morphology for Efficient Methane Oxidation

A General and Straightforward Route to Noble Metal-Decorated Mesoporous Transition-Metal Oxides with Enhanced Gas Sensing Performance

Design and Experimentation with Sandwich Microstructure for Catalytic Combustion-Type Gas Sensors

Pt Nanostructures Fabricated by Local Hydrothermal Synthesis for Low-Power Catalytic-Combustion Hydrogen Sensors

Nanostructured Mesoporous Tungsten Oxide for Gas Sensor Applications

Nano-sized alumina supported palladium catalysts for methane combustion with excellent thermal stability

Synthesis of a novel Pd/Al_2O_3 catalyst for Ventilation Air Methane combustion with excellent catalytic activity in low temperatures

Rational Synthesis and Gas Sensing Performance of Ordered Mesoporous Semiconducting WO3/NiO Composites

Nanohybrids of Pt-Functionalized Al2O3/ZnO Core-Shell Nanorods for High-Performance MEMS-Based Acetylene Gas Sensor

Micellar Nanoreactors Enabled Site-Selective Decoration of Pt Nanoparticles Functionalized Mesoporous SiO2 /Wo3-X Composites for Improved CO Sensing.