Abstract:International Journal of Modern Physics B, Ahead of Print. A simple approach dealing with thermal oxidation at atmospheric pressure was used to synthesize copper oxide nanowires (CuO-NWs) on copper substrate. The vertically oriented CuO-NWs were used for further subjected to deposition of ultrathin layer (∼20[math]nm) of lanthanum hexaboride (LaB[math] using the electron beam evaporation technique. The observation of the characteristic vibrational mode of LaB6 in the Raman spectrum of LaB6-coated CuO-NWs (LaB6@CuO-NWs) revealed the existence of LaB6 in the deposited sample. Furthermore, confirmation of LaB6 coating on CuO-NWs was corroborated by X-ray photoelectron spectroscopy (XPS) analysis. The field electron emission (FEE) characteristics of pristine CuO-NWs and LaB6@CuO-NWs were investigated in a planer diode geometry at a base pressure of [math][math]mbar. The values of turn-on and threshold fields (defined at emission current density of 1 and 10[math][math]A/cm2, respectively) were found to be 5.4[math]V/[math]m and 1.6[math]V/[math]m (for pristine CuO-NWs emitter) and 6.75, and 2.85[math]V/[math]m (for LaB6@CuO-NWs emitter). Interestingly, a noticeably large emission current density of [math][math][math]A/cm2 has been extracted from the LaB6@CuO-NWs emitter at a relatively lower applied field of 5.8[math]V/[math]m. The Fowler–Nordheim (FN) plots of both the emitters showed nonlinear behavior, indicative of their semiconductive nature. Furthermore, both the emitters showed relatively stable emission behavior tested at a pre-set value of 1[math][math]A more than 3[math]h. The enhanced FEE behavior of LaB6@CuO-NWs emitter is attributed to the modulation of electronic properties due to LaB6-CuO interface-induced effects. Although the promising FEE behavior of LaB6@CuO-NWs emitter warrants its potential for practical applications, further improvement can be achieved via fabricating an array emitter due to CuO NWS and optimizing the thickness of LaB6 coating.

Tunable field emission characteristics of ZnO nanowires coated with varied thickness of lanthanum boride thin films

Synthetic and Effect of Annealing on the Luminescent Properties of Zno Nanowire

Improved field electron emission behavior of ultrathin lanthanum hexaboride-coated copper oxide nanowires

Effect of Surface O2 Adsorption on the Field Emission Performances of LaB6 Nanowires

Effect Of Surface O-2 Adsorption On The Field Emission Performances Of Lab6 Nanowires

Fabrication of Lanthanum Hexaboride Single Nanowire Field Emitter and Their Field Emission Properties

Stable, Self-Ballasting Field Emission from Zinc Oxide Nanowires Grown on an Array of Vertically Aligned Carbon Nanofibers

Field Emission Enhancement of ZnO Nanorod Arrays with Hafnium Nitride Coating

LaB6 Nanowires and Their Field Emission Properties

Growth And Characterization Of Cu-Catalyzed Zno Nanowires

Enhanced Field Emission Properties of Titanium Nitride Coated ZnO Nanowires

Field Emission and Optical Properties of ZnO Nanowires Grown Directly on Conducting Brass Substrates.

Ultrathin Seed-Layer for Tuning Density of ZnO Nanowire Arrays and Their Field Emission Characteristics

Fabrication of ZnO Nanowires by Vapor-Phase Deposition and Their Field Emission Properties

Electronic Structures and Properties of Lanthanide Hexaboride Nanowires

Field emission from Au nanoparticles decorated ZnO nanowires

A moderate synthesis route of 5.6 mA-current LaB6 nanowire film with recoverable emission performance towards cold cathode electron source applications

Enhanced Field Emission Performance of Lanthanum Hexaboride Coated on Graphene Film

Synthesis, Characterization and Photoluminescence Property of La-doped ZnO Nanoparticles

Surface Coating Effect on Field Emission Performance of Zno Nanowires

Synthesis, optical and field electron emission properties of low-dimensional ZnO nano-structures