Abstract:Membrane separation has great potential for carbon dioxide capture, and materials play paramount important role in the membrane technology. In this paper, the mixed-monomer strategy is proposed for synthesis of a functional porous aromatic framework (PAF) named as PAF-45DPA. The monomer of diphenyl is employed for formation of the porous network and another monomer of diphenylamine is introduced to yield basic nitrogen sites. As a consequence, the prepared PAF-45DPA material possesses a surface area of 679 m(2) g(-1) with dominant pore size of similar to 0.58 nm which educes selective adsorption property toward carbon dioxide with IAST selectivity of 63.1 and CO2 uptake of similar to 45.3 cm(3) g(-1) at 298 K and 101 kPa measured from CO2 and N-2 adsorptions. PAF-45DPA is subsequently used to fabricate hollow fiber membranes by hybridization with polysulfone (PSF) through the technique of dry jet-wet quench. Gas permeation analysis of CO2 and N-2 reveals that the separation performance of PAF-45DPA/PSF is superior to those of PAF-45 and PDPA built from unary monomers. The PAF-45DPA/PSF membrane shows a dramatic improvement in the CO2/N-2 separation factor (24.2) compared to PAF-45/PSF (15.4) and a significant enhancement in the CO2 permeance (72.6 GPU) compared to PDPA (51 GPU) at 298 K and 0.12 MPa. High stability of the PAF-45DPA/PSF membrane is also demonstrated together with its low cost and scale up production possibilities, which shed a light on advanced CO2 capture technology development for industrial gas exhausts.

New Tricks for Old Molecules: Development and Application of Porous N-doped, Carbonaceous Membranes for CO2 Separation.

Carbon Membranes: New Tricks for Old Molecules: Development and Application of Porous N‐doped, Carbonaceous Membranes for CO2 Separation (adv. Mater. 30/2013)

Synthesis of Porous, Nitrogen-Doped Adsorption/Diffusion Carbonaceous Membranes for Efficient CO2Separation

A Superacid-Catalyzed Synthesis of Porous Membranes Based on Triazine Frameworks for CO2 Separation.

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Synthesis of porous, nitrogen-doped adsorption/diffusion carbonaceous membranes for efficient CO2 separation.

Selective Permeation of CO2 Through Pore-Filled Polyacrylonitrile Membrane with Poly(ethylene Glycol)

Heteroatom-doped noble carbons tailored mixed matrix membrane with ultrapermeability for efficient CO2 separation

Surpassing Robeson Upper Limit for CO2/N2 Separation with Fluorinated Carbon Molecular Sieve Membranes

In-situ Enforcing Molecular Diffusion to Functionalize Hollow Fiber Carbon Membranes Enables Efficient CO2 Separations

High-Performance Polymers for Membrane Co2/N-2 Separation

In Situ Hydrolyzed Microporous Polymer Membranes for Additional Free Volume to Facilitate CO2 Permeation

Ultrathin PEI-functionalized Carboxyl Covalent Organic Framework Membranes for Efficient CO2/N2 Separation

Mixed Monomer Derived Porous Aromatic Frameworks with Superior Membrane Performance for CO2 Capture

Surface functionalization of Polymers of Intrinsic Microporosity (PIMs) membrane by polyphenol for efficient CO2 separation

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

Graphene membranes with pyridinic nitrogen at pore edges for high-performance CO 2 capture

A high performance antioxidative and acid resistant membrane prepared by interfacial polymerization for CO2 separation from flue gas

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Controlled Superacid-Catalyzed Self-Cross-Linked Polymer of Intrinsic Microporosity for High-Performance CO2 Separation

Novel Aminated F-Ce Nanosheet Mixed Matrix Membranes with Controllable Channels for CO2 Capture