Abstract:Membrane separation has great potential for carbon dioxide capture, and materials play paramount important role in the membrane technology. In this paper, the mixed-monomer strategy is proposed for synthesis of a functional porous aromatic framework (PAF) named as PAF-45DPA. The monomer of diphenyl is employed for formation of the porous network and another monomer of diphenylamine is introduced to yield basic nitrogen sites. As a consequence, the prepared PAF-45DPA material possesses a surface area of 679 m(2) g(-1) with dominant pore size of similar to 0.58 nm which educes selective adsorption property toward carbon dioxide with IAST selectivity of 63.1 and CO2 uptake of similar to 45.3 cm(3) g(-1) at 298 K and 101 kPa measured from CO2 and N-2 adsorptions. PAF-45DPA is subsequently used to fabricate hollow fiber membranes by hybridization with polysulfone (PSF) through the technique of dry jet-wet quench. Gas permeation analysis of CO2 and N-2 reveals that the separation performance of PAF-45DPA/PSF is superior to those of PAF-45 and PDPA built from unary monomers. The PAF-45DPA/PSF membrane shows a dramatic improvement in the CO2/N-2 separation factor (24.2) compared to PAF-45/PSF (15.4) and a significant enhancement in the CO2 permeance (72.6 GPU) compared to PDPA (51 GPU) at 298 K and 0.12 MPa. High stability of the PAF-45DPA/PSF membrane is also demonstrated together with its low cost and scale up production possibilities, which shed a light on advanced CO2 capture technology development for industrial gas exhausts.

Carbon Membranes: New Tricks for Old Molecules: Development and Application of Porous N‐doped, Carbonaceous Membranes for CO2 Separation (adv. Mater. 30/2013)

New Tricks for Old Molecules: Development and Application of Porous N-doped, Carbonaceous Membranes for CO2 Separation.

CO2 Facilitated Transport Through an Acrylamide and Maleic Anhydride Copolymer Membrane

Preparation of Free-Standing High Quality Mesoporous Carbon Membranes

A Superacid-Catalyzed Synthesis of Porous Membranes Based on Triazine Frameworks for CO2 Separation.

Carbon Membranes for CO 2 Separation

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Synthesis of Porous, Nitrogen-Doped Adsorption/Diffusion Carbonaceous Membranes for Efficient CO2Separation

Synthesis of porous, nitrogen-doped adsorption/diffusion carbonaceous membranes for efficient CO2 separation.

Surface functionalization of Polymers of Intrinsic Microporosity (PIMs) membrane by polyphenol for efficient CO2 separation

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Design of Poly(ether Block Amide)/polyacrylonitrile Composite Membrane for Carbon Dioxide Capture

In Situ Hydrolyzed Microporous Polymer Membranes for Additional Free Volume to Facilitate CO2 Permeation

Ultrathin PEI-functionalized Carboxyl Covalent Organic Framework Membranes for Efficient CO2/N2 Separation

Facile Manufacture of Porous Organic Framework Membranes for Precombustion CO2 Capture

Recent Developments on Polymeric Membranes for CO2 Capture from Flue Gas

Mixed Monomer Derived Porous Aromatic Frameworks with Superior Membrane Performance for CO2 Capture

Selective Permeation of CO2 Through Pore-Filled Polyacrylonitrile Membrane with Poly(ethylene Glycol)

Graphene membranes with pyridinic nitrogen at pore edges for high-performance CO 2 capture

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers