Abstract:This work investigates the potential of combining hardness gradient with surface texture (an example of bionic coupling) to improve anti-wear properties. The bionic coupling of hardness gradient and Hexagonal Texture (HT) was achieved by laser heat treatment on steel specimens with pre-engraved hexagonal surface texture. The successful establishment of decreasing hardness from surface to internal bulk was verified by hardness measurements along the depth of cross-sectioned specimens and correlated with the observations from metallurgical microscopy. The tribological performance of bionic coupling specimens (HT-L) was examined under dry contact condition, together with respective control specimens of individual bionic features, e.g. HT-H (of similar surface hardness generated by conventional heat treatment but without hardness gradient) and SS-L (of smooth surface treated by the same laser processing as for HT-L). It is found that HT-L not only exhibits lower friction coefficient and less friction fluctuation than HT-H and SS-L, but also demonstrates a >50% reduction of wear loss compared to HT-H and SS-L (0.0343 g for HT-L vs. 0.0723 g for HT-H, P<0.001; 0.0343 g for HT-L vs. 0.0817 g for SS-L, P<0.001). Corroboratively, observations with scanning electron microscopy revealed a relatively smooth surface for worn HT-L specimen, contrasting with the rugged and grooved surfaces of worn HT-H and SS-L specimens. These results indicate that the bionic coupling of hardness gradient to hexagonal texture can indeed improve anti-wear properties, affording a new strategy to wear and friction management.

Wear properties of H13 with micron scale and nano scale grains bionic units processed by laser remelting

Effects of substrate microstructure on biomimetic unit properties and wear resistance of H13 steel processed by laser remelting

Study on the Response and Wear Property of Die Steels with Varying Compositions to Laser Remelting Bionic Treatment

Wear Properties of Compact Graphite Cast Iron with Bionic Units Processed by Deep Laser Cladding WC

Mechanical properties of TiC-reinforced H13 steel by bionic laser treatment

Bio-inspired Wearable Characteristic Surface: Wear Behavior of Cast Iron with Biomimetic Units Processed by Laser

Influence of Laser Energy Density on Acquisition and Wear Resistance of Bionic Semisolid Unit of 40cr Steel

Influence of processing medium on frictional wear properties of ball bearing steel prepared by laser surface melting coupled with bionic principles

Wear Resistance of Different Bionic Structure Manufactured by Laser Cladding on Ti6Al4V

Bionic Coupling of Hardness Gradient to Surface Texture for Improved Anti-Wear Properties

Bionic Laser Surface Remelting for the Wear Performance after Thermal Fatigue of B2 Die Steel Based on Surface Stress Simulation

Effect of hardness gradient of laser bionic coupling unit on wear resistance of 6082 aluminum alloy

Effect of the Microhardness Difference Between Base Metal and Bionic Coupling Unit on Wear Resistance of Gray Cast Iron

Microstructure and Mechanical Properties of H13 Steel/High-Speed Steel Composites Prepared by Laser Metal Deposition

Effect of Dual Hardness Combinations on Wear Resistance of Laser Prepared Bionic Grey Iron Surfaces.Effect of Dual Hardness Combinations on Wear Resistance of Laser Prepared Bionic Grey Iron Surfaces

Wear Performance of Modified H-13 and H418E Steels for TBM Disc Cutter Ring

The Effect of Laser-Cladded Co6, T400, and Ni-Based 30WC Coatings on the Wear Resistance of H13 Steel

Effect of different hardness units on fatigue wear resistence of low hardenability steel

Influence of H13 steel unit on wear behavior of vermicular cast iron

Effect of Composition on the Mechanical Properties and Wear Resistance of Low and Medium Carbon Steels with a Biomimetic Non-Smooth Surface Processed by Laser Remelting

Assessment of Mechanical Behavior in H13 Tool Steel Synthesized through Electron Beam Melting and Selective Laser Melting Techniques