Abstract:This paper presents the design, analysis, and testing of a parallel-kinematic high-bandwidth XY nanopositioning stage driven by piezoelectric stack actuators. The stage is designed with two kinematic chains. In each kinematic chain, the end-effector of the stage is connected to the base by two symmetrically distributed flexure modules, respectively. Each flexure module comprises a fixed-fixed beam and a parallelogram flexure serving as two orthogonal prismatic joints. With the purpose to achieve high resonance frequencies of the stage, a novel center-thickened beam which has large stiffness is proposed to act as the fixed-fixed beam. The center-thickened beam also contributes to reducing cross-coupling and restricting parasitic motion. To decouple the motion in two axes totally, a symmetric configuration is adopted for the parallelogram flexures. Based on the analytical models established in static and dynamic analysis, the dimensions of the stage are optimized in order to maximize the first resonance frequency. Then finite element analysis is utilized to validate the design and a prototype of the stage is fabricated for performance tests. According to the results of static and dynamic tests, the resonance frequencies of the developed stage are over 13.6 kHz and the workspace is 11.2 μm × 11.6 μm with the cross-coupling between two axes less than 0.52%. It is clearly demonstrated that the developed stage has high resonance frequencies, a relatively large travel range, and nearly decoupled performance between two axes. For high-speed tracking performance tests, an inversion-based feedforward controller is implemented for the stage to compensate for the positioning errors caused by mechanical vibration. The experimental results show that good tracking performance at high speed is achieved, which validates the effectiveness of the developed stage.

Design issues in a decoupled XY stage: Static and dynamics modeling, hysteresis compensation, and tracking control

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Design and control of a decoupled two degree of freedom translational parallel micro-positioning stage

Design, Control of an Aerostatic X-Y Planar Motion Stage for Precision Positioning

Design of a decoupled 2-DOF translational parallel micro-positioning stage

Motion Control of Piezoelectric Positioning Stages: Modeling, Controller Design, and Experimental Evaluation

Design, Analysis and Testing of A Parallel-Kinematic High-Bandwidth Xy Nanopositioning Stage

Design and Cooperation Control Analysis of a Coarse-Fine Dual Stage Drive Positioning System

Adaptive Robust Precision Motion Control of a Piezoelectric Positioning Stage

Adaptive Robust Repetitive Control of Piezoelectric Actuators

Robust adaptive control of piezo-actuated positioning stages with an ellipse-based hysteresis model

Design, modeling, and control of a monolithic compliant x-y- microstage using a double-rocker mechanism

Modeling and Control of a Novel X-Y Parallel Piezoelectric-Actuator Driven Nanopositioner

Control system design for nano-positioning using piezoelectric actuators

Design and Disturbance Rejection Control of a Piezoelectric Nanopositioning Stage

Design, Control and Application of a PZT-driven Micro-stage

Development of a Parallel-Kinematic High-Speed XY Nanopositioning Stage

Design and Analysis of a New Flexure-Based XY Stage

Finite-time adaptive sliding mode control for high-precision tracking of piezo-actuated stages

Integrating positioning X-Y stage based on bulk micromachining