Abstract:Highly flexible, nonvolatile resistive switching-based memory devices with a hierarchical thin-film architecture were fabricated using a low-temperature, cost-efficient solution processing technique. The device structure consists of an ITO-coated flexible PET substrate as the bottom electrode and a PMMA-embedded reduced-graphene/ZnO nanoparticle (NP) (rGO/ZnO NP) heterostructure as the flexible active layer. Besides, a PMMA-embedded graphene oxide (GO/PMMA)-based device was also fabricated as a reference. The operating voltage of this device is limited within ±2 V, whereas the ON/OFF current ratio is ∼106, which is ∼103 times higher than the reference device. The device also exhibited excellent endurance and retention characteristics, with no significant degradation for more than 50 cycles. Besides, the retention time of this device is ∼104 s, which is several times more than that of the reference device. These electrical performance enhancements were attributed to the multifunctionality introduced by the rGO/ZnO NP heterostructures, which combine the excellent conductivity of rGO nanosheets with charge trapping and transport properties and high electron mobility of ZnO nanostructures. A model based on the energy band of the components of this composite material has been proposed for a better understanding of this mechanism. Flexibility studies exhibited stable device performance for an extreme bending radius of 6 mm. The resistance of the device in ON and OFF states did not show any significant change even after 1000 bending cycles, thus establishing the device as an excellent memory candidate for flexible electronic applications such as flexible displays and sensors, wearable devices, implantable medical devices, and portable diagnostic devices.

Fabrication of Flexible, All-Reduced Graphene Oxide Non-Volatile Memory Devices

A Fast Room-Temperature Strategy for Direct Reduction of Graphene Oxide Films Towards Flexible Transparent Conductive Films

Bulk Heterojunction Polymer Memory Devices With Reduced Graphene Oxide As Electrodes

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

A New Reducing Agent to Prepare Single-Layer, High-Quality Reduced Graphene Oxide for Device Applications

Characteristics of Reduced Graphene Oxide Quantum Dots for a Flexible Memory Thin Film Transistor

Toward All-Carbon Electronics: Fabrication of Graphene-Based Flexible Electronic Circuits and Memory Cards Using Maskless Laser Direct Writing.

High-efficiency and room-temperature reduction of graphene oxide: a facile green approach towards flexible graphene films.

Graphene oxide for nonvolatile memory application by using electrophoretic technique

Retention Behavior of Graphene Oxide Resistive Switching Memory on Flexible Substrate

One-step Preparation of Graphene Oxide–poly(3,4 Ethylenedioxythiophene) Composite Films for Nonvolatile Rewritable Memory Devices

Scalable Self-Assembled Reduced Graphene Oxide Transistors On Flexible Substrate

The Nano-Scale Resistive Memory Effect of Graphene Oxide

Functionalized Graphitic Carbon Nitride for Metal-free, Flexible and Rewritable Nonvolatile Memory Device Via Direct Laser-Writing

Flexible, Multilevel, and Low-Operating-voltage Resistive Memory Based on MoS2–rGO Hybrid

Graphene Oxide Nanosheets Based Organic Field Effect Transistor for Nonvolatile Memory Applications

Flexible Metal‐Free Memory Electronic Made of Π‐conjugation‐interrupted Hyperbranched Polymer Switch and Reduced Graphene Oxide Electrodes

Preparation of MoS₂-polyvinylpyrrolidone nanocomposites for flexible nonvolatile rewritable memory devices with reduced graphene oxide electrodes.

Fabricating Reduced Graphene Oxide Films with High Volumetric Capacitive Performances Via Thermal and Acid Treatment

Chemical-Vapor-Deposited Graphene As Charge Storage Layer in Flash Memory Device