Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Comprehensive Optimization of Pid-Type Closed-Loop Mems Accelerometer System

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Noise Analysis and Parameter Optimization of Digital MEMS Accelerometer System

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

A Mems Electro-Mechanical Co-Optimization Platform Featuring Freeform Geometry Optimization Based on a Genetic Algorithm

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

A New Type of MEMS Accelerometer with Up-Tuning Structure

A Stiffness-Tunable MEMS Accelerometer

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

Genetic Algorithm for Electro-Mechanical Co-Optimization of a MEMS Accelerometer Comprising a Mechanical Motion Pre-Amplifier with a 2Nd-Order Sigma Delta Modulator

Modeling and Analysis of a Closed-Loop System for High-Q MEMS Accelerometer Sensor

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Stabilization Control of a MEMS Accelerometer With Tuned Quasi-Zero Stiffness

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

A Modulated Feedback Approach to Improve Closed Loop MEMS Accelerometer Bias Instability

Coupled Double Closed-Loop Control for an MEMS Resonant Accelerometer

Closed loop detection circuit for high Q value accelerometer based on PID feedback

A Novel Digital Closed Loop MEMS Accelerometer Utilizing a Charge Pump.

The High-Efficiency Design Method for Capacitive MEMS Accelerometer