Abstract:The calibration accuracy of the inertial navigation system (INS) has a non-negligible effect on its actual navigation performance. As the core component of the INS, the scale factor error of the fiber optical gyroscope (FOG) is one of the main error sources of the INS, which has a vital impact on the navigation accuracy. Generally, the scale factor of FOG is considered to be a constant value, but with the increasing demand for the accuracy of FOG, the scale factor error can not be ignored, how to calibration the FOG scale factor at different input velocity rates and temperature has attracted people's attention. The traditional calibration methods usually select several fixed temperature points and input velocity points, then the scale factor error is compensated by linear fitting or piecewise fitting. In order to improve the calibration accuracy, our paper considers the coupling effect of input velocity rate and temperature and designs a calibration experiment at continuous input velocity rates and temperature, the calibration time is shortened by 30%, then we propose a nonlinear error compensation method based on the LSTM. The experimental result shows that the std error of the FOG scale factor is reduced from 280 ppm to 13 ppm and the angle measurement error is reduced by 70%, which verify the effectiveness of our method.

Improvement on scale factor performance of open-loop fiber optic gyro

Scale Factor Calibration and Dynamic Angle Measurement Method Based on Self-Collimator and Fiber Optic Gyroscope

Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

Angle error from vibrating in tri-axial interferometric fiber optic gyroscopes and the evaluation with dual-laser Doppler vibrometers

General comments on signal processing scheme for fiber optic gyroscope

IFOG Output Fluctuation Caused by Electrostriction Effect and Its Solution

Influence of intensity noise on the resonant fiber optic gyroscope and restraining

Angular Random Walk Improvement of a Fiber-Optic Gyroscope Using an Active Fiber Ring Resonator

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Review of Development of Interferometric Fiber-Optic Gyroscopes

Study on Nonlinear Error Calibration of Fiber Optical Gyroscope Scale Factor Based on LSTM

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Principle and Application of High Dynamic Fiber Gyroscope

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Compensation of Scale Factor Nonlinear Error Introduced by Harmonic Distortion for Open-Loop Fiber Optic Gyroscopes.

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

Realization and performance tests of a dual-polarization fiber optic gyroscope

Research Progress of the Resonant Fiber Optic Gyroscope Technology

Compensation of Scale Factor Error for Open-loop Fiber Optic Gyroscopes

Analysis of Scale Factor Error for Open-loop Fiber Optic Gyroscope with A Digital Signal Processing System