Abstract:Aluminum metal matrix composites (Al-MMCs) have become attractive for engineering structural applications due to their excellent properties and are increasingly seen as alternative to the conventional monolithic materials particularly in the automotive, aerospace and defence industries. In this study, Al-4043/Ni-coated SiC composite was developed via stir casting process and the mechanical properties of the composites investigated. The composites were produced with varying SiC reinforcement fraction between 5-25 wt%. The microstructure of the composites was characterized using optical microscope and tensile properties of the composite with the monolithic Al-4043 alloy were assessed using a universal testing machine. The composite hardness was assessed using a Brinell hardness testing machine, energy required to break the composite was assessed using Charpy impact testing machine and the wear rate of the composites were evaluated using a Rubin Disc machine. The composites were characterized to possess Al-SiC eutectic microstructure with SiC solid solution precipitates and SiC particles uniformly distributed in the Al matrix. The density of the composites was found to linearly increase with increasing SiC reinforcement fractions. The tensile strength, yield strength and elastic modulus were found to increase with increasing SiC reinforcement fraction and highest values obtained for composite with 25 wt% SiC were 350 MPa, 254 MPa and 13.4 GPa respectively. However, the elongation of the composite with the highest reinforcement was lowest at a value of 10%. The hardness, compressive strength and impact energy of the composites increased significantly as composite with 25 wt% SiC possessed 76 HB, 184 MPa and 48 J respectively. The wear resistance of the Al-4043/SiC composites with highest SiC reinforcement was found to be eleven times that of the monolithic Al-4043 alloy.

Strength and Fatigue Properties of SiC Particle-Reinforced AC4C Based Aluminum Alloy Composites Fabricated by Melt Stirring-Gravity Casting

Microstructures and Mechanical Properties of MgAl2O4 Particle-Reinforced AC4C Aluminum Composites

Microstructures and mechanical properties ofMgAl 2

Study of properties research on instrument grade SiC/Gr/Al composites

Mechanical Test on Aluminum Alloy with Maximal Soluble SiC Reinforcement

Micromechanical properties of high fracture performance SiCp–6061Al/6061Al composite

Mechanical Properties of Aluminum-4043/Nickel-coated Silicon Carbide Composites Produced via Stir Casting

Aging Behavior of High Volume Fraction SiC Particles Reinforced 2024al Composite

Influence of characteristic parameters of SiC reinforcements on mechanical properties of AlSi10Mg matrix composites by powder metallurgy

STUDY OF FABRICATION AND COMPRESSIVE PERFORMANCE OF ALUMINIUM ALLOY MATRIX GRADIENT COMPOSITES REINFORCED WITH SiC PARTICLES

High-cycle fatigue of a metal matrix composite based on an aluminum alloy 7075-T1 reinforced with silicon carbide particles

Low-cycle Fatigue Behavior of SiCp/Al–Si Composites Produced by Spray Deposition

The Effect of Micro-SiCp Content on the Tensile and Fatigue Behavior of AZ61 Magnesium Alloy Matrix Composites

Regarding the Si Content Associated Micro-Structural Characteristics on the Low Cycle Fatigue Behaviour of Al-Si/SiCp Composite.

Effect of Heat Treatment on Microstructure and Mechanical Properties of Squeeze Cast n SiCp/AZ91D Magnesium Matrix Composites

Microstructure and properties of spray-deposited 2014+15 vol pct SiC particulate-reinforced metal matrix composite

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Microstructure and Mechanical Properties of Al/Al4C3/Al2O3 Composite

Aging Behavior and Precipitation Kinetics of SiCp/6061AI Composites

Thermal properties of a high volume fraction SiC particle-reinforced pure aluminum composite

Microstructure and Mechanical Properties of 45 vol.% SiC p /7075Al Composite