Abstract:Aluminum matrix composite have shown the great prospects in improving service performance and life of high-end equipment under harsh conditions due to lightweight and high specific strength. However, the presence of coarse Mg2Si phase with undesired morphology in Mg2Si/Al composites limits their engineering application. This study proposes a strategy of TiB2 ceramic particles regulating the morphology and size of Mg2Si to strengthen the aluminum matrix composites by incorporating dual-scale hybrid reinforcements of Mg2Si and TiB2. The TiB2 particles were introduced into the Al-15 wt pct Mg2Si composite by a master alloy method, and the influence of TiB2 particles on the morphology and size of Mg2Si, and Al grains of composites were investigated. The results demonstrate that 3 wt pct TiB2 particles can refine the primary Mg2Si from 14.6 to 10.4 μm, resulting in a more regular morphology. Additionally, the eutectic Mg2Si transforms from a long and slender Chinese character shape to a short rod shape, reducing the aspect ratio by 65.9 pct from 10.9 to 3.7. During the solidification process, TiB2 particles promote the heterogeneous nucleation of primary Mg2Si phases and impede the growth, leading to significant refinement. However, the improved morphology of eutectic Mg2Si is mainly attributed to the inhibited preferential growth due to the formation of a nanoparticle layer, with no observed heterogeneous nucleation of TiB2. Moreover, TiB2 particles significantly refine the grain size of Al from 212.7 to 70.8 μm. The addition of 3 wt pct TiB2 greatly improves the strength of the composites from 302 to 373 MPa, without losing ductility. After T6 heat treatment, Al-15 wt pct Mg2Si composites exhibit simultaneous improvement in the strength and ductility. Compared with composites without TiB2 particles (361 MPa and 32 pct), Al-15Mg2Si-3TiB2 composites have more superior strength–ductility combination of 434 MPa and 35 pct due to the significant modification of Mg2Si phase, grain refinement, and Orowan strengthening.

Significantly enhanced fatigue resistance and mechanisms of hypoeutectic Al-Si composite calibrated using trace in-situ nanocrystals

Achieving ultrahigh fatigue resistance in AlSi10Mg alloy by additive manufacturing

Optimization of Thermo-Mechanical Fatigue Life for Eutectic Al–Si Alloy by the Ultrasonic Melt Treatment

Effects of Ni Content on Low Cycle Fatigue and Mechanical Properties of Al-12Si-0.9Cu-0.8Mg-xNi at 350 °C

Enhancing the Fatigue Resistance of High and Medium Entropy Alloys by Manufacturing-Driven Microstructural Developments

Achievement of High Strength and Ductility in Al–Si–Cu–Mg Alloys by Intermediate Phase Optimization in As-Cast and Heat Treatment Conditions

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Enhancing fatigue crack propagation resistance of heterostructured Al composites and multistage crack mechanisms

Nacre-like surface nanolaminates enhance fatigue resistance of pure titanium

Nacre-like surface nanolaminates induce superior fatigue resistance in gradient pure titanium

Synergistic Effects of Γ-Al2o3 Nanoparticles and Fast Cooling on the Microstructural Evolution and Mechanical Properties of Al-20Si Alloys

Low cycle fatigue response and fracture mechanism in a novel Al-3.5Si-0.5Mg-0.4Cu casting alloy

High-temperature, low-cycle fatigue behavior of an Al-Mg-Si based heat-resistant aluminum alloy

Optimizing strength and fatigue crack propagation resistance of in-situ TiB 2 /Al-Cu-Mg composite sheet

Biomedical core–shell micro-nanocrystalline Ti6Al4V5Cu alloy with high fatigue properties

Significant Microstructure Refinement and Improved Mechanical Properties of Mg2Si/Al Composites Induced by Nanoscale TiB2 Particles

Thermo-Mechanical Fatigue Behavior and Resultant Microstructure Evolution in Al-Si 319 and 356 Cast Alloys

Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy

Microstructural refinement and tensile properties enhancement of Al-10Mg2Si cast alloys by copper addition

High fatigue performance and microscopic mechanisms of in-situ TiB 2 /7050Al composite at different temperatures

Influence of Ni Contents on Microstructure and Mechanical Performance of AlSi10Mg Alloy by Selective Laser Melting