Abstract:Backwashing in sand filters with 2-h and 4-h EBCTs was simulated. ● Removal efficiency of five micropollutants recovered within 2 d at 2-h EBCT. ● Active biomass of sand filters recovered within 2 d under two EBCTs. ● Microbial composition gradually recovered to pre-backwashing level at 2-h EBCT. ● Recovered microbes only accounted for 15.55 %–25.69 % in the sand filters at 4-h EBCT. Backwashing is crucial for preventing clogging of sand filters. However, few studies have investigated the effect of backwashing on micropollutant removal and the dynamic changes in the microbial community in sand filters. Here, we used a series of manganese and quartz sand filters under empty bed contact times (EBCTs) of 2 h and 4 h to explore variations in micropollutant degradation and temporal dynamics of the microbial community after backwashing. The results showed that the removal efficiencies of caffeine, sulfamethoxazole, sulfadiazine, trimethoprim, atrazine, and active biomass recovered within 2 d after backwashing in both types of sand filters at 2-h EBCT, but the recovery of sulfadiazine and trimethoprim was not observed at 4-h EBCT. Moreover, the removal efficiency of atenolol increased after backwashing in the manganese sand filters, whereas maintained almost complete removal efficiency in the quartz sand filters at both EBCTs. Pearson correlation analysis indicated that microbial community composition gradually recovered to the pre-backwashing level (R increased from 0.53 to 0.97) at 2-h EBCT, but shifted at 4-h EBCT (R < 0.25) after backwashing. Furthermore, the compositions of the recovered, depleted, and improved groups of microbes were distinguished by applying hierarchical clustering to the differentially abundant amplicon sequence variants. The cumulative relative abundance of recovered microbes at 2-h EBCT was 82.76 % ± 0.43 % and 46.82 % ± 4.34 % in the manganese and quartz sand filters, respectively. In contrast, at 4-h EBCT, the recovered microbes dropped to 15.55 %–25.69 % in both types of sand filters.

Influence of Backwashing Time on Iron, Manganese, Ammonia and Turbidity Removal Using A Pilot-Scale Biological Filter

Removal Efficiency of Combined Treatment Process on Raw Water with High Ammonia Nitrogen and High Organic Pollutants

Effect of Influent Flow Rate Distribution on the Performance of Step-Feed Biological Nitrogen Removal Process

Effect of Flow Rate Increase on the Performance of a Pilot-Scale Biological Nutrient Removal Reactor

Operational Performance, Biomass and Microbial Community Structure: Impacts of Backwashing on Drinking Water Biofilter.

Performance and microbial community profiles in pilot-scale biofilter for ammonia, iron and manganese removal at different dissolved oxygen concentrations

Impacts of Backwashing on Micropollutant Removal and Associated Microbial Assembly Processes in Sand Filters

The role of backwash in start-up of full-scale drinking water biofilters

Backwash intensity and frequency impact the microbial community structure and function in a fixed-bed biofilm reactor

Investigation on Evaluation Criteria of Backwashing Effects for a Pilot-Scale BAF Treating Petrochemical Wastewater.

Effect of the Empty-bed Residence Time on the Filtering Pool of Biological Activity

Study on ammonia nitrogen removal and oxygen demand of different filter media in drinking water treatment

Efficient chemical and microbial removal of iron and manganese in a rapid sand filter and impact of regular backwash

Impact of Different Medias on Pollutants Removal in Biological Aerated Filters

Comparison of physicochemical iron removal mechanisms in filters

Using a Laboratory Column Experiment to Explore the Influence of an Antecedent Dry Period on the Nutrient Removal of a Bioretention Filter

Impact of Fe2+ on Manganese-removing Mature Period of Single-stage Iron and Manganese Removal Filter

Effects of Periods of Nonuse and Fluctuating Ammonia Concentration on Biofilter Performance

Removal of Ammonia Nitrogen from Raw Water in Multi-functional Filter with Activated Anthracite

Parameters of Manganese Sand Biological Filtration Process in Recycling of Wastewater from Steel and Iron Production

Study on Optimization of Biological Filter Bed Thickness for Removal of Iron and Manganese