Abstract:In the pilot-scale experiments of advanced water treatment for north pearl river raw water situated in Foshan,Guangdong Province,there are two processes-activated carbon(GAC) and ozone-biological activated carbon(O3-BAC) are used,whose removal efficiencies of the various concentration ammonia nitrogen are compared.The effects of the pretreatment process with prechlorination on advanced treatment efficiencies with O3-BAC are analyzed.The results are as follows: the processes-GAC and O3-BAC have carrying capacities of a sudden ammonia nitrogen pollution.Under low concentration of ammonia nitrogen, the average removal rate of GAC and O3-BAC processes are nearly the same(about 40%).Their removal rate rises with the increasing of influent ammonia nitrogen contents.The CHCl3 concentration from the effluent of GAC or O3-BAC process meets the standard,but the CHCl3 content from O3-BAC process is lower than that from GAC.Considering the treatment cost,GAC process is taken precedence of O3-BAC.The removal rate of O3-BAC process is higher than that of GAC obviously.The CHCl3 concentration from the effluent of O3-BAC process is also lower than that from GAC.Under this case,to use the O3-BAC process is better.If the optimum removal efficiency is to be achieved,the proper influent ammonia nitrogen content is required 0.57～0.62 mg/L for O3-BAC whose removal rate is beyond 93%(when 0.43～0.62 mg/L,the removal rate is beyond 70%) and 0.5～0.57 mg/L for GAC whose removal rate is in the range 70%～76.3%.The suitable removal range to the ammonia nitrogen of O3-BAC is wider than GAC.When the residual chlorine concentration from the effluent of the settling tank is lower than 0.1 mg/L,the prechlorination process can be used in front of the O3-BAC.

Study on ammonia nitrogen removal and oxygen demand of different filter media in drinking water treatment

Removal of Ammonia Nitrogen from Raw Water in Multi-functional Filter with Activated Anthracite

Removal Efficiency of Combined Treatment Process on Raw Water with High Ammonia Nitrogen and High Organic Pollutants

Removal of Ammonia Nitrogen with Pure Oxygen Aeration and Activated Anthracite Filter

Biologically Enhanced Filtration with Activated Anthracite for Removal of Ammonia Nitrogen from Drinking Water

Study on a New Filtration Medium-Activated Anthracite and its Filtration Process

Factors Influencing Ammonia Removal of Biological Activated Filter in Drinking Water Treatment

Ammonia Nitrogen Removal of Drinking Water at Low Temperature by O3 - BEAC Process

Ammonium Removal of Biological Roughing Filter for Rural Drinking Water Pretreatment

Characteristics of Ammonia Nitrogen and Nitrite Nitrogen Removal with GAC-Sand Dual Media Filter Processes

Study on the Filtration Performance of Activated Anthracite for Removal of Organics

Effect of Influent Flow Rate Distribution on the Performance of Step-Feed Biological Nitrogen Removal Process

Ammonium removal pathways and microbial community in GAC-sand dual media filter in drinking water treatment.

Effects of ammonia nitrogen concentration on the selection of advanced treatment process with activated carbon

[Removal Efficiency and Mechanism of Ammonia Nitrogen in a Low Temperature Groundwater Purification Process].

Efficiency of Biological Aerated Filter with Suspended Media and Zeolite for Treatment of Low-temperature and High Ammonia Nitrogen Source Water

Study on the Control of Dichloroacetonitrile Generation by Two-Point Influent Activated Carbon-Quartz Sand Biofilter

Comparative Study on Treatment of Micro-Polluted Raw Water by Ozone-Activated Carbon and BAF-biologically Enhanced Filtration Process

Study on Ammonia Nitrogen Removal from Source Water by Using Biological Aerated Filter with Porcelain Beads As Carrier

Treating Greywater Using Quartz Sand Filters: the Effect of Particle Size, Substrate Combinations, and Reflux Ratio

Nitrification and Denitrification in Biological Activated Carbon Filter for Treating High Ammonia Source Water