Abstract:Among the available membranes, dense polymer composite hollow-fiber membranes are promising for gas permeation applications coupled with the use of gas/liquid contactors, but they are also used in other membrane processes such as pervaporation. This study focuses on a coating process, starting from a polymer solution, to control the thickness and regularity of the coated polymer. The thickness of the liquid film coated onto a fiber is related to the coating velocity, the physical and chemical properties of the liquid, and the coating geometry. Depending on the dominating forces, several regimes are defined: two unstable regimes, in which a thin and regular polymer layer cannot be produced, and two stable regimes, which are of interest for reaching our objectives at the laboratory or industrial scale. The theoretical laws were compared to experimental coatings with solutions of poly(trimethylsilyl)propyne (PTMSP) dissolved in cyclohexane coated onto poly(ether sulfone) (PES) hollow fibers. The viscosities, surface tensions, and densities of the solutions used were measured. The experimental thicknesses of coated polymer layers were compared to values calculated from Landau’s law, which describes the thickness behavior in the viscocapillary regime. The results showed good behavior agreement, but the experimental thickness was underestimated by the calculations. Four different kinds of composite membranes were prepared using two different porous supports (MicroPES and Oxyphan) and two different permeable polymers (PTMSP and Teflon AF2400) for coating. The obtained composites hollow fibers were characterized. All four presented low-energy surfaces with no wetting phenomena. They also exhibited high CO2 and N2 permeabilities with CO2/N2 selectivities between 3.4 and 2.5. The mechanical properties of the composites remained stable except for composites based on PES affected by the drying step during the coating process.

Interfacially Polymerized Composite Hollow Fiber Membrane for CO2 Separation

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Poly (Vinyl Alcohol) Composite Membrane with Polyamidoamine Dendrimers for Efficient Separation of CO2/H2 and CO2/N2

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Interfacial polymerization of COF-polyamide composite membranes modified with ionic liquids for CO 2 separations

Fabrication of Polydimethysiloxane (PDMS) Dense Layer on Polyetherimide (PEI) Hollow Fiber Support for the Efficient CO2/N2 Separation Membranes

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Preparation of Reverse Osmosis Composite Membrane with High Flux by Interfacial Polymerization of Mpd and Tmc

Preparation of a PVA/Chitosan/Glass Fiber Composite Membrane and the Performance in CO2 Separation

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

The Effects of PEI Hollow Fiber Substrate Characteristics on PDMS/PEI Hollow Fiber Membranes for CO2/N2 Separation

High Solvent Resistance PTFPMS/PEI Hollow Fiber Composite Membrane for Gas Separation

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

Preparation of a novel dual-layer polyvinylidene fluoride hollow fiber composite membrane with hydrophobic inner layer for carbon dioxide absorption in a membrane contactor

Fabrication and Characterization of Poly(vinylidene Fluoride)–polytetrafluoroethylene Composite Membrane for CO2 Absorption in Gas–liquid Contacting Process

Hollow-Fiber Coating: Application to Preparation of Composite Hollow-Fiber Membrane for Gas Separation

Improving CO2 Permeation and Separation Performance of CO2-philic Polymer Membrane by Blending CO2 Absorbents

Optimization of Coating Solution Viscosity of Hollow Fiber‐supported Polydimethylsiloxane Membrane for CO2/H2 Separation

High-efficiency CO2 separation using hybrid LDH-polymer membranes