Abstract:Carbon nanotube field-effect transistor (CNT FET) has been considered as a promising candidate for future high-performance and low-power integrated circuits (ICs) applications owing to its ballistic transport and excellent immunity to short channel effects (SCEs). Still, it easily suffers from the ambipolar property, and severe leakage current at off-state originated from gate-induced drain leakage (GIDL) in CNT FETs with small bandgap. Although some modifications on device structure have been experimentally demonstrated to suppress the leakage current in CNT FETs, there is still a lack of the structure with excellent scalability, which will hamper the development of CNT FETs toward a competitive technology node. Here, we explore how the device geometry design affects the leakage current in CNT FETs, and then propose the possible device structures to suppress off-state current and check their availability through the two-dimensional (2D) TCAD simulations. Among all the proposed structures, the L-shaped-spacer CNT FET exhibits significantly suppressed leakage current and excellent scalability down to sub-50 nm with a simple self-aligned gate process. According to the simulation results, the 50 nm gate-length L-shaped-spacer CNT FET exhibits an off-state current as low as approximately 1 nA/µm and an on-current as high as about 2.1 mA/µm at a supply voltage of −1 V and then can be extended as a universal device structure to suppress leakage current for all the narrow-bandgap semiconductors based FETs.

Elimination of Gate Leakage in GaN FETs by Placing Oxide Spacers on the Mesa Sidewalls

High Frequency InGaAs MOSFET with Nitride Sidewall Design for Low Power Application.

Spacer Side-wall Processed 0.15 Μm GaN HEMT for Ka-band Application

Improved Fabrication of Fully-Recessed Normally-off SiN/SiO2/GaN MISFET Based on the Self-Terminated Gate Recess Etching Technique

Nitride Spacer Aided 0.15 Μm AlGaN/GaN HEMT Fabrication with Optimized Gate Patterning Process

A Novel High-Performance Planar InAs/GaSb Face-Tunneling FET With Implanted Drain for Leakage Current Reduction

High Threshold Voltage Stability Enhancement-Mode GaN p-FETs Fabricated With PEALD-AlN Gate Interfacial Layer

Planar Wrap-Around Gated Algan/Gan Mis-Hemts

Normally-off GaON/p-GaN gate HEMTs with using selective plasma oxidation: from structural characterization, performance improvement to physical mechanism

Improved Performance of Fully-Recessed Normally-off LPCVD SiN/GaN MISFET Using N2O Plasma Pretreatment

Suppression of Leakage Current in Carbon Nanotube Field-Effect Transistors

GaN metal-oxide-semiconductor field-effect-transistor with atomic layer deposited Al2O3 as gate dielectric

Reverse-Blocking Normally-OFF GaN Double-Channel MOS-HEMT with Low Reverse Leakage Current and Low ON-State Resistance

Characterization of Gate Leakage and Reliability of Normally-OFF GaN MOSFET with LPCVD-SiN<sub><i>x</i></sub>/PEALD-AlN Dual Gate Dielectric and <i>In-Situ</i> H<sub>2</sub>(15%)/N<sub>2</sub>(85%) Plasma Pretreatment

Gate-Recessed Normally OFF GaN MOSHEMT With High-Temperature Oxidation/Wet Etching Using LPCVD Si3N4 as the Mask

Improvement of device isolation using field implantation for GaN MOSFETs

Gate-Recessed Normally-OFF GaN MOSHEMT with Improved Channel Mobility and Dynamic Performance Using AlN/Si 3 N 4 As Passivation and Post Gate-Recess Channel Protection Layers

Gate reliability enhancement of p-GaN gate HEMTs with oxygen compensation technique

Gate Leakage Suppression and Breakdown Voltage Enhancement in p-GaN HEMTs using Metal/Graphene Gates

Normally-off GaN HEMTs with InGaN P-Gate Cap Layer Formed by Polarization Doping

Miniature Mesa Extension for a Planar Submicron AlGaN/GaN HEMT Gate Formation