Abstract:Composite megastructure would be more used in bridge construction because of its higher performance and less material cost. Experimental studies were conducted to investigate the cooperative performance of double steel plate concrete composite tower and compare the behaviour of composite tower and reinforced concrete tower. The specimens were based on the megastructure – the composite tower of the Nanjing No.5 Yangtze River Bridge, which was the first large-span cable-stayed bridge using double steel plate concrete composite tower. By designing full- scale four-point bending tests, the size effect was eliminated. The cooperative performance between steel and concrete in tension and compression areas was investigated. After the loading process, two composite specimens showed typical bending failure mode, and the RC beam showed the mid-span bending failure mode after the shearing span slipped. The steel-concrete composite specimen showed higher initial stiffness and ultimate bearing capacity than the RC specimen by 51% and 49% respectively in the load-displacement curves. Increasing the thickness of composite steel plate from 14mm to 20mm could improve the initial stiffness of composite specimen by 9% and the ultimate bearing capacity by 11%, but would reduce the ductility by 28%. Therefore, the stiffness, strength and ductility of the structure should be weighed in the composite tower design, and there existed optimal steel plate thickness. The slip between steel plate and concrete did not exceed 0.3mm before the specimen yielding. The composite tower of Nanjing No.5 Bridge had a good cooperative performance between the steel and the concrete. In addition, the composite tower had better structural performance than the RC tower, which was worth promotion.

Double-deck steel truss web PC composite bridge design and construction method

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Study on the wave-truss composite bridge design

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

Optimization of Mechanical Behavior of Steel and Concrete Continuous Composite Truss Girder Bridge

Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Structural analysis of prestressed composite box girder bridge with corrugated web

Study on prestressed transfer efficiency and moment amplitude modulation of steel-concrete composite bridge

Experimental Studies on the Cooperative Performance of Steel- Concrete Composite Large-span Bridge Tower

Experimental study on the mechanical behavior and design method of plain steel-plate and concrete composite bridge decks

Experimental study on flexural behavior of steel-laminated concrete (NC and UHPC) composite beams with corrugated steel webs

Experimental and Numerical Analysis on Bending Behavior of Hybrid Bridge Deck System Composed of Transversely Connected OSD and Composite Deck

Research on Approach Bridge Design of Shenzhen University No. 1 Bridge

Experimental study on prefabricated composite box girder bridge with corrugated steel webs

Flexural behavior of novel profiled steel-UHTCC assembled composite bridge decks

Flexural behavior of concrete-filled rectangular steel tubular composite truss beams in the negative moment region

Experimental and Numerical Study of Transversal Flexural Behavior on Steel Ultrahigh-Toughness Cementitious Composite Bridge Decks