Abstract:In order to solve the problem that the reinforced concrete bridge panel was easy to crack under the action of load, which made it difficult to replace the bridge panel in concrete, a new hybrid fiber concrete（HFRC） composite beam bridge panel was proposed. First, four test specimens（2 HFRC specimens, 2 ordinary concrete specimens） were designed and tested under monotonic and cyclic loading, the mechanical properties of the bridge deck were analyzed from the failure mode, crack development, load-deflection and load-strain. Then the standard finite element model was set up considering the constitution relationship of HFRC, and the effects of different dosages（volume fraction, the same below） steel fiber（0%, 0.5%, 1% and 1.5%） and polypropylene fiber（0%, 0.05%, 0.1% and 0.15%） on the static properties of bridge deck were studied. Finally, according to the experimental and numerical results, based on the existing specification of the formula of reinforced concrete slab shear bearing capacity, fiber characteristic values were introduced, the calculation method of bearing capacity of HFRC bridge deck was proposed based on the specifications. The results show that the fiber not only increases the bearing capacity of the bridge deck under monotonic and cyclic loading by 9% and 6%, but also plays an effective role in strengthening, toughening and crack resistance. The capacity and crack resistance of bridge deck are improved with the increasing of steel fiber content, however the amount of polypropylene fiber has little effect on the improvement of the cracking load and ultimate bearing capacity of the bridge deck, but it can improve the ductility of the bridge deck. The combination of polypropylene fiber and steel fiber can improve the bearing capacity, stiffness and toughness of the bridge panel after buckling. The calculation method can provide a reference for the design of HFRC bridge deck. 5 tabs, 13 figs, 24 refs.

Experimental and Numerical Analysis on Bending Behavior of Hybrid Bridge Deck System Composed of Transversely Connected OSD and Composite Deck

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Experimental and analytical studies on flexural behavior of composite bridge decks with orthotropic steel deck and ultra-high-performance concrete (UHPC) slab under negative moment

Bending performance of prefabricated ultra-thin UHPC unit plate reinforced orthotropic steel bridge decks

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

An Experimental Study on Negative Bending Behavior of Composite Bridge Decks with Steel-Fiber-Reinforced Concrete and Longitudinal Bulb-Flat Ribs

Full-Scale Experimental Study on the Negative Flexural Behavior of Orthotropic Steel–Concrete Composite Bridge Deck

Experimental Study on Fatigue Performance of UHPC-orthotropic Steel Composite Deck

Mechanical behavior of HFRC bridge deck for composite bridge

Experimental study on flexural behavior of hollow steel-UHPC composite bridge deck

Experimental Study and Numerical Analysis on Mechanical Behavior of T-shape Stiffened Orthotropic Steel-Concrete Composite Bridge Decks

Performance of the Orthotropic Composite Bridge Deck with U-shape Stiffener

Bending Performance of Composite Bridge Deck with T-shaped Ribs

Mechanical behavior of natural bonding interface in hollow steel-UHPC composite bridge deck

A Pilot Study on Structural Responses of Normal Concrete-UHPC Composite Bridge Decks W/wo Rebars Through an Experimental-Numerical Approach

Experimental and Numerical Study of Transversal Flexural Behavior on Steel Ultrahigh-Toughness Cementitious Composite Bridge Decks

Interface Stress Analysis and Fatigue Design Method of Steel-Ultra High Performance Concrete Composite Bridge Deck

Flexural Performance and Design of Steel-UHTCC Composite Bridge Decks with Different Composite Degrees under Hogging Moments

Flexural Behaviour of Orthotropic Composite Bridge Deck