Analysis and assessment of articulated skew hollow slab beam bridge
Ying Yang,Yiqiang Xiang,Xiaoyang He,Yuliang He
2014-01-01
Abstract:When a bridge crosses a river or road in a skew angle, the structural type becomes a skew bridge. For the skew articulated slab beam bridges, the simplified method is difficult to calculate the complicated static and dynamic behavior accurately. This paper, taking Xiazheyang Bridgethe RC skew hollow slab bridge with 45 degrees oblique angle as the background, which was designed and built in 1999 in terms of The Standard of Loadings for the Municipal Bridge Design(CJJ 77-98,China). With economic development and increase of traffic volume, the load carry capacity of the bridge is requested to enhance by the new Standard of Loadings (CJJ 11-2011). The internal forces and vibration modal shape of this typical skew bridge under the two design load were analyzed by FEM. The field testing was completed. The predicted results were compared with the testing values. It shows that the stiffness and bearing capacity of Xiazheyang bridge satisfy the relevant specification requirements. The measured vibration frequency values and are very closed to or slightly more than the theoretical frequencies. 1 Graduate Student Researcher, Dept. of Civil Engineering, Zhejiang University, Hangzhou, P.R. China,310058 2 Professor, Dept. of Civil Engineering, Zhejiang University, Cyrus Tang Center for Sensor Materials and Istanbul Bridge Conference August 11-13, 2014 Istanbul, Turkey Analysis and Assessment of Articulated Skew Hollow Slab Beam Bridge Ying Yang, Yiqiang Xiang , Xiaoyang He, Yuliang He