Abstract:This work is a natural extension of the author’s previous work: “Multiple scattering theory for heterogeneous elastic continua with strong property fluctuation: theoretical fundamentals and applications” (arXiv:1706.09137 [physics.geo-ph]), which established the foundation for developing multiple scattering model for heterogeneous elastic continua with either weak or strong fluctuations in mass density and elastic stiffness. Polycrystalline material is another type of heterogeneous materials that widely exists in nature and extensively used in industry. In this work, the corresponding multiple scattering theory for polycrystalline materials with randomly oriented anisotropic crystallites is developed. To validate the theory, the theoretical results for a series of materials such as OFHC copper, 304 stainless steel, and Inconel 600 are compared to experimental measurements and the numerical results obtained using finite element simulations. Detailed analysis shows that the new theory is capable of predicting the dispersion and attenuation of polycrystals with satisfactory accuracy. The results also show the new model can give an estimate on the average grain size with a relative error equal to or less than ten percent. As applications in ultrasonic nondestructive evaluation, we calculated the dispersion and attenuation coefficient of one of the most important polycrystalline materials in aeronautics engineering: high-temperature titanium alloys. The effects of grain symmetry, grain size, and alloying elements on the dispersion and attenuation behaviors are examined. Key information is obtained which has significant implications for quantitatively evaluating the average grain size, monitoring the phase transition, and even estimating gradual change in chemical composition of titanium components in gas turbine engines. For applications in seismology, the velocities and Q-factors for both hexagonal and cubic polycrystalline iron models for the Earth’s uppermost inner core are obtained in the whole frequency range. Using the realistic material parameters of iron under the high temperature and high-pressure conditions calculated from ab initio simulations, the numerical results show that the Q-factors range from 0.001 to 0.05, which shows good agreement with that inferred from real seismic data. The new model predicts the velocity of longitudinal waves varies between ± 1% to ± 5 % relative to the Voight average velocity, while the velocity of transverse waves varies from ± 10% to ± 20%, which gives promising explanation to the abnormally slow transverse velocity observed in practical measurements. The numerical results support the conjecture that the Earth’s uppermost inner core is a solid polycrystalline medium. The comprehensive numerical examples show the new model is capable of capturing the most important scattering features of both ultrasonic and seismic waves with satisfactory accuracy. This work provides a universal, quantitative model for characterization of a large variety of polycrystalline materials. It also can be extended to incorporate more complicated microstructures, including ellipsoidal grains with or without textures, and even multi-phase polycrystalline materials. The new model demonstrates great potential of applications in ultrasonic nondestructive evaluation and inspection of aerospace and aeronautic structures. It also provides a theoretical framework for quantitative seismic data explanation and inversion for the material composition and structural formations of the Earth’s inner core.

Statistic Derivation of Taylor Factors for Polycrystalline Metals with Application to Pure Magnesium

Simulation of Texture Evolution in Magnesium Alloy: Comparisons of Different Polycrystal Plasticity Modeling Approaches

Crystal Plasticity Analysis of Plane Strain Deformation Behavior and Texture Evolution for Pure Magnesium

Effect of Hardening Models on the Prediction of Deformation Textures for Polycrystalline

The Polycrystalline Plasticity Due to Slip and Twinning During Magnesium Alloy Forming

Evaluating the Taylor hardening model in polycrystalline Ti using high energy X-ray diffraction microscopy

Modeling of plastic deformation of magnesium alloys with random texture: A challenge to constitutive model for twinning

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31

A 3d Monte-Carlo (Potts) Model For Recrystallization And Grain Growth In Polycrystalline Materials

Plastic anisotropy and twin distributions near the fatigue crack tip of textured Mg alloys from in situ synchrotron X-ray diffraction measurements and multiscale mechanics modeling

An Elastic–viscoplastic Crystal Plasticity Modeling and Strain Hardening for Plane Strain Deformation of Pure Magnesium

Crystal plasticity-based finite element modeling of twin transmission across grain boundaries in magnesium

Multiscale Mechanical Behavior and Microstructure Evolution of Extruded Magnesium Alloy Sheets: Experimental and Crystal Plasticity Analysis

Crystal plasticity extended models based on thermal mechanism and damage functions: Application to multiscale modeling of aluminum alloy tensile behavior

Crystal Plasticity Finite Element Modelling of the Extrusion Texture of A Magnesium Alloy

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

Multiple Scattering Theory for Polycrystalline Materials with Strong Grain Anisotropy: Theoretical Fundamentals and Applications

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Simulation Study on the Texture Evolution Mechanism of Magnesium Alloy Cylindrical Parts with Inner Ribs During Hot Power Spinning

A non-local model for the description of twinning in polycrystalline materials in the context of infinitesimal strains: application to a magnesium alloy