Abstract:The graphite floating ring is a key sealing element of the turbopump of aeroengines. Its wear induced by frequent flotation during its operation can result in stress concentration and microscopic cracks in its seal end face, more leakage from its sealing surface, a lower engine efficiency, and even serious safety concerns. However, there are currently no published studies regarding the modeling of the end face wear of the floating ring seal. This work presents a new fractal model for predicting the wear rate and wear evolution of the end face of the floating ring seal. Firstly, a new normal fractal contact model was implemented by microscopically considering the deformation mechanism, interaction forces, and flash points of the asperities on the end face of the floating ring. On this basis, a fractal model was built to predict the wear of the end face of the floating ring according to its wear mechanism and the corrected Archard theory. The wear rates predicted according to this model are in good agreement with the test results. The simulation results show that (i) the depth wear rate of the end face of the floating ring first decreases and then increases as the fractal dimension D increases (the minimum is reached when the fractal dimension ranges from 1.60 to 1.725); (ii) the depth wear rate of the end face of the floating ring increases as the characteristic scale G , friction factor f , floatation speed of the floating ring v , and end face pressure P increase; (iii) the impact of the end face pressure on the depth wear rate is minimum when the fractal dimension ranges from 1.60 to 1.65; (iv) the flotation displacement of the floating ring cannot exceed 12 μm when the engine speed is higher than 30,000 r/min.

Prediction of Leakage Based on the Change of the Surface Topography

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

A Non-Ideal Geometry Based Prediction Approach of Fitting Performance and Leakage Characteristic of Precision Couplings.

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

A Surface Connectivity-Based Approach for Leakage Channel Prediction in Static Sealing Interface

Prediction of sealing interface leakage based on porous medium model considering effective porosity

A Percolation Method of Leakage Calculation and Prediction Within the Mechanical Seal Interface

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

Leakage prediction approach and influencing factor analysis from seal test

Application of Fractal Contact Model in Dynamic Performance Analysis of Gas Face Seals

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

A study on building and testing fractal model for predicting end face wear of Aeroengine's floating ring seal

Study on the Evolution of Sealing Performance during the Start-Up Process of Dynamic Pressure Seals Based on Three-Dimensional Fractal Functions

Method of Predicting Valve Seal Leakage Considering Deflection of the Spool

Study on Time-Correlated Leakage Predication Model of Nonmetallic Gaskets

Gas Leakage Prediction of Contact Interface in Fabric Rubber Seal Based on a Rectangle Channel Model

Sediment-wear morphology prediction method of hydraulic machine based on differential-quadrature method

PEMFC sealing modeling relating to fractal characteristics of gasket-BPP interface based on micro-contact

Interface Leakage Theory of Mechanical Seals Considering Microscopic Forces

Analytical model for the sealant performance of tunnel gasketed joints based on multi-scale contact and percolation theories