Abstract:This paper presents an improved method for achieving controllable preparation of the composition and size of the monotectic alloy core-shell structure microspheres. This advancement is expected to enhance the commercial application of monotectic alloy core-shell structure microspheres. By installing a heating device at the top of the drop tube in the pulsated orifice ejection method setup, we achieved in-situ heat treatment of falling droplets, resulting in the successful preparation of Al 45 (Sn 42 Bi 58 ) 55 core-shell structure microspheres. Furthermore, we investigated the formation mechanism of the Al@Sn-Bi core-shell structure. Nine sets of Al-Sn-Bi microspheres with varying in-situ heat treatment temperatures were prepared. Analysis via X-ray diffraction and transmission electron microscopy revealed that the microspheres consisted of Al-rich, Sn-rich, and Bi-rich phases, without any intermetallic compounds. Scanning electron microscopy results indicated that as the in-situ heat treatment temperature increased, the structure of the Al-Sn-Bi microspheres transitioned from irregular to regular core-shell configurations. This suggests that higher heat treatment temperatures prolong liquid phase separation time, leading to increased repetition of Marangoni motion within the droplet, Ostwald ripening of the minor phase droplets, and Soret effect of the matrix phase. However, at temperatures exceeding 700 °C, the solidification rate of alloy droplets decreased, causing the Al-rich phase core to deviate from the center and form a crescent structure due to Stokes motion.

Liquid Immiscibility and Core-Shell Morphology Formation in Ternary Al–Bi–Sn Alloys

The Core-Shell Structure of Al70bi11sn19 Immiscible Alloy Particles

Formation of core-type microstructure in Al–Bi monotectic alloys

Phase separation and formation of core-type microstructure of Al–65.5 mass% Bi immiscible alloys

Phase Equilibria and Solidification of Ternary Sn–Bi–Ag Alloys

In Situsynchrotron Study of Liquid Phase Separation Process in Al-10 Wt.% Bi Immiscible Alloys by Radiography and Small Angle X-ray Scattering

Macrosegregation Driven by Movement of Minor Phase in (al0.345bi0.655)90sn10 Immiscible Alloy

One-Step Fabrication of Al/Sn-Bi Core–Shell Spheres Via Phase Separation

Liquidus Projection and Solidification of the Sn-In-Cu Ternary Alloys

Dynamic Behaviors of Minor Droplets and the Role of Bubbles in Phase-Separating AlBi Immiscible Alloy

Core-shell structure with reversible composition of Al-Bi immiscible alloy particles prepared by pulsated orifice ejection method

Dynamic behaviors of minor droplets and the role of bubbles in phase-separating Al Bi immiscible alloy

Thermodynamic properties and primary phase structures of ternary Cu90−xSnxSb10 alloys investigated by differential scanning calorimetry and laser flash method

An improved preparation method of core-shell Al@Sn-Bi microspheres and its microstructure formation mechanism

Atomic tuning effect of TiB2 particles on the liquid phase separation behavior of an Al-Bi immiscible alloy

Composition- and Temperature-Dependent Liquid Structures in Al–Cu Alloys: Anab Initiomolecular Dynamics and X-Ray Diffraction Study

Thermodynamic Properties and Phase Equilibria of Sn–Bi–Zn Ternary Alloys

Formation Mechanism of Microstructure of Melt Spun Al-In Immiscible Alloys

Liquidus Projections of Sn-Co-Ni and Sn-Rich Sn-Ag-Co-Ni Systems

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Liquidus Projection and Thermodynamic Modeling of a Sn-Ag-Zn System