Abstract:Vertical axis wind turbines can harvest kinetic energy in the air stream from all directions and therefore have distinct advantages in the effective utilization of wind resource. Its aerodynamic performance highly depends on the blade geometrical configuration, especially on the tip shapes due to the negative effects of the shedding vortices. In this paper, spatially high-resolution numerical methods are adopted to study the evolution and mutual interaction process for the vortex system formed behind a vertical axis wind turbine with and without blade tip winglet, aiming at further understand the mechanism of the winglet effects on the turbine aerodynamic performance. For the cases without tip winglet, it has been shown that the high-resolution methods can properly capture the evolution and interaction of the omega-shaped vortices system and revealed the differences of the vortex mutual induction in the near wake region under three tip speed ratios. Then, the region in spanwise dominated by the effects of tip vortex is determined by proper orthogonal decomposition survey on the flow field of vertical profiles and based on which the winglet is installed hoping to maximize its three-dimensional effects on the spanwise flow field. The comparison of power coefficients for cases with and without winglet under the same swept area show that the winglet has significantly improved the effectiveness of energy harvesting in the studied tip speed ratios. Finally, the analysis of tip vortex circulation evolution demonstrates that the enhancement of power coefficient for the winglet case comes from the reduction of the spanwise region affected by tip vortex, instead of the strength decrease of the tip vortex itself. The conclusions can further reveal the flow mechanism of winglet effects on the vertical axis wind turbine aerodynamic performance, and therefore are helpful for guiding the optimized blade winglet design to achieve higher efficiency.

The Viscous and Inviscid Interaction Aerodynamic Model for HAWT

Numerical Investigation of the Impact of Wind Turbine Rotor on the Passive Cooler above Nacelle

Study on the Actuator Body Model for Hawt

A New Stall Delay Model for HAWT Based on Inviscid Theory

Simulating Unsteady Aerodynamics of Helicopter Rotor with Panel/viscous Vortex Particle Method

Study on A New Aerodynamic Model of Hawt Based on Panel Method and Reduced Order Model Using Proper Orthogonal Decomposition

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Prediction of 3D Aerodynamics Performance of Wind Turbines Using Potential Based Panel Method

A Hybrid Solver for Aerodynamic Performance of Wind Turbine Airfoils

A viscous blade body force model for computational fluid dynamics–based throughflow analysis of axial compressors

A new class of actuator surface models for wind turbines

3D Stall Delay Effect Modeling and Aerodynamic Analysis of Swept-Blade Wind Turbine

Visualization of Aerodynamic Forces and Flow Field on a Straight-Bladed Vertical Axis Wind Turbine by Wind Tunnel Experiments and Panel Method

Analysis of VAWT aerodynamics and design using the Actuator Cylinder flow model

High-resolution numerical investigation into the effects of winglet on the aerodynamic performance for a three-dimensional vertical axis wind turbine

Experimental Investigations of Airfoil Surface Flow of a Horizontal Axis Wind Turbine with LDV Measurements

An Insight into the Separate Flow and Stall Delay for HAWT

Dimensional reduction analyzing the thermoelastic behavior of wind turbine blades based on the variational asymptotic multiscale method

New vortex‐lift and tangential‐force models for HAWT aerodynamic load prediction

Research on three-dimensional wake model of horizontal axis wind turbine based on Weibull function

Study of New Actuator Surface Model for Wind Turbine