Abstract:Increasing wind power generation has been introduced into power systems to meet the renewable energy targets in power generation. The output efficiency and output power stability are of great importance for wind turbines to be integrated into power systems. The wake effect influences the power generation efficiency and stability of wind turbines. However, few studies consider comprehensive corrections in an aerodynamic model and a turbulence model, which challenges the calculation accuracy of the velocity field and turbulence field in the wind turbine wake model, thus affecting wind power integration into power systems. To tackle this challenge, this paper proposes a modified Reynolds-averaged Navier–Stokes (MRANS)-based wind turbine wake model to simulate the wake effects. Our main aim is to add correction modules in a 3D aerodynamic model and a shear-stress transport (SST) k-ω turbulence model, which are converted into a volume source term and a Reynolds stress term for the MRANS-based wake model, respectively. A correction module including blade tip loss, hub loss, and attack angle deviation is considered in the 3D aerodynamic model, which is established by blade element momentum aerodynamic theory and an improved Cauchy fuzzy distribution. Meanwhile, another correction module, including a hold source term, regulating parameters and reducing the dissipation term, is added into the SST k-ω turbulence model. Furthermore, a structured hexahedron mesh with variable size is developed to significantly improve computational efficiency and make results smoother. Simulation results of the velocity field and turbulent field with the proposed approach are consistent with the data of real wind turbines, which verifies the effectiveness of the proposed approach. The variation law of the expansion effect and the double-hump effect are also given.

Study on the Actuator Body Model for Hawt

Numerical Investigation of the Impact of Wind Turbine Rotor on the Passive Cooler above Nacelle

A new class of actuator surface models for wind turbines

Generalized analytical body force model for actuator disc computations of wind turbines

Development and assessment of an actuator volume method in rotating frame for predicting the flow-field of horizontal-axis wind turbines

Reproduction of five degree-of-freedom loads for wind turbine using equispaced electro-hydraulic actuators

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Aerodynamic Analysis And Optimization Of Wind Turbines Based On Full Free Vortex Wake Model

An Improved Body Force Model to Simulate Blade Loading Variation Under Various Operating Conditions in Transonic Axial Flow Compressor

A viscous blade body force model for computational fluid dynamics–based throughflow analysis of axial compressors

A Comparative Analysis of Actuator-Based Turbine Structure Parametrizations for High-Fidelity Modeling of Utility-Scale Wind Turbines under Neutral Atmospheric Conditions

A Computationally Efficient Dynamical Model of Fluidic Soft Actuators and Its Experimental Verification

A Modified Reynolds-Averaged Navier–Stokes-Based Wind Turbine Wake Model Considering Correction Modules

Validation of an Actuator Line Model Coupled to a Dynamic Stall Model for Pitching Motions Characteristic to Vertical Axis Turbines

CFD and Experimental Studies on Wind Turbines in Complex Terrain by Improved Actuator Disk Method

Analysis of Aerodynamic Characteristics of Vertical Axis Wind Turbine (VAWT) Based on Modified Double Multiple Stream Tube Model

6-Dof Numerical Simulation Of The Vertical-Axis Water Turbine

Research on three-dimensional wake model of horizontal axis wind turbine based on Weibull function

Theoretical investigation of the power curve of small HAWT by combining aerodynamic and mechatronic systems

Analysis of VAWT aerodynamics and design using the Actuator Cylinder flow model