Abstract:Understanding the aerodynamic performance of scaled-down models is vital for providing crucial insights into wind energy optimization. In this study, the aerodynamic performance of a scaled-down model (12%) was investigated. This validates the findings of the unsteady aerodynamic experiment (UAE) test sequence H. UAE tests provide information on the configuration and conditions of wind tunnel testing to measure the pressure coefficient distribution on the blade surface and the aerodynamic performance of the wind turbine. The computational simulations used shear stress transport and kinetic energy (SST K-Omega) and transitional shear stress transport (SST) turbulence models, with wind speeds ranging from 5 m/s to 25 m/s for the National Renewable Energy Laboratory (NREL) Phase VI and 4 m/s to 14 m/s for the 12% scaled-down model. The aerodynamic performance of both cases was assessed at representative wind speeds of 7 m/s for low, 10 m/s for medium, and 20 m/s for high flow speeds for NREL Phase VI and 7 m/s for low, 9 m/s medium, and 12 m/s for the scaled-down model. The results of the SST K-Omega and transitional SST models were aligned with experimental test measurement data at low wind speeds. However, the SST K-Omega torque values exhibited a slight deviation. The transitional SST and SST K-Omega models yielded aerodynamic properties that were comparable to those of the 12% scaled-down model. The torque values obtained from the simulation for the full-scale NREL Phase VI and the scaled-down model were 1686.5 Nm and 0.8349 Nm, respectively. Both turbulence models reliably predicted torque and pressure coefficient values that were consistent with the experimental data, considering specific flow regimes. The pressure coefficient was maximum at the leading edge of the wind turbine blade on the windward side and minimum on the leeward side. For the 12% scaled-down model, the flow simulation results bordering the low-pressure region of the blade varied slightly.

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Numerical Investigation on the Flow and Power of Small-Sized Multi-Bladed Straight Darrieus Wind Turbine

Numerical investigation of vortex dynamics in an H-rotor vertical axis wind turbine

3-D numerical simulation of aerodynamic performance of horizontal-axis wind turbine

Systematic investigation of effect of rotor solidity on vertical-axis wind turbines: Power performance and aerodynamics analysis

Numerical Simulation of Vertical Axis Wind Turbine with Cambered Airfoil

Numerical Investigation of Aerodynamic Performances for NREL 5-MW Offshore Wind Turbine

Numerical Study of Flow Field and Aerodynamic Performance of Straight Bladed VAWT at Variable Tip Speed Ratios

Aerodynamic Analysis of the Wind Turbine by Two Different Numerical Methods

Numerical Investigation of Effects of Turbulence Intensity on Aerodynamic Performance for Straight-Bladed Vertical-Axis Wind Turbines

Mathematical modeling and performance evaluation of Ducted Horizontal-axis Helical Wind Turbines: Insights into aerodynamics and efficiency

Numerical Investigation of Solidity Effect Based on Variable Diameter on Power Performance of H-type Darrieus Vertical Axis Wind Turbine (VAWT)

Performance Enhancement of Horizontal Axis Wind Turbine Using Numerical Techniques

Numerical Study on Aerodynamic Performance of Fore- and Aft-loaded Turbine Blades

Aerodynamic Performance and Numerical Validation Study of a Scaled-Down and Full-Scale Wind Turbine Models

Aerodynamic performance analysis of a floating wind turbine with coupled blade rotation and surge motion

Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine

Effect of number of blades on performance and wake recovery for a vertical axis helical hydrokinetic turbine

Influence of Blade Number on the Flow Characteristics in the Vertical Axis Propeller Hydro Turbine

Numerical Investigations on the Aerodynamic Performance of Wind Turbine: Downwind Versus Upwind Configuration

Effects of Near-Wall Grid Spacing on SST-K-ω Model Using NREL Phase VI Horizontal Axis Wind Turbine