Abstract:A method for inverse design of horizontal axis wind turbines (HAWTs) is presented in this paper. The direct solver for aerodynamic analysis solves the Reynolds Averaged Navier Stokes (RANS) equations, where the effect of the turbine rotor is modeled as momentum sources using the actuator disk model (ADM); this approach is referred to as RANS/ADM. The inverse problem is posed as follows: for a given selection of airfoils, the objective is to find the blade geometry (described as blade twist and chord distributions) which realizes the desired turbine aerodynamic performance at the design point; the desired performance is prescribed as angle of attack ($\alpha$) and axial induction factor ($a$) distributions along the blade. An iterative approach is used. An initial estimate of blade geometry is used with the direct solver (RANS/ADM) to obtain $\alpha$ and $a$. The differences between the calculated and desired values of $\alpha$ and $a$ are computed and a new estimate for the blade geometry (chord and twist) is obtained via nonlinear least squares regression using the Trust-Region-Reflective (TRF) method. This procedure is continued until the difference between the calculated and the desired values is within acceptable tolerance. The method is demonstrated for conventional, single-rotor HAWTs and then extended to multi-rotor, specifically dual-rotor wind turbines. The TRF method is also compared with the multi-dimensional Newton iteration method and found to provide better convergence when constraints are imposed in blade design, although faster convergence is obtained with the Newton method for unconstrained optimization.

A Hybrid Solver for Aerodynamic Performance of Wind Turbine Airfoils

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Analysis of Turbulent Separated Flows for the NREL Airfoil Using Anisotropic Two-Equation Models at Higher Angles of Attack

Prediction of 3D Aerodynamics Performance of Wind Turbines Using Potential Based Panel Method

Simulation of low-speed separated flows for the NREL airfoil at high angles of attack

Simulating Unsteady Aerodynamics of Helicopter Rotor with Panel/viscous Vortex Particle Method

The numerical simulation of separated flow at large attack angles for a wind turbine airfoil

Combination of Advanced Actuator Line/Disk Model and High-Order Unstructured Finite Volume Solver for Helicopter Rotors

Surrogate Model Based Liner Optimization for Aeroengines and Comparison with Finite Elements

A solver for subsonic flow around airfoils based on physics-informed neural networks and mesh transformation

Hybrid RANS/LES Capabilities of the Flow Solver FLOWer—Application to Flow Around Wind Turbines

Inverse Design of Single- and Multi-Rotor Horizontal Axis Wind Turbine Blades using Computational Fluid Dynamics

An Efficient Numerical Method for Coupling the RANS Equations with Spalart-Allmaras Turbulence Model Equation

Experimental and numerical validation of a hybrid method for modelling the wake flow of two in-line wind turbines

Design of wind-turbine blades for improving aerodynamic performance using hybrid blades