Abstract:In this study, a high-performance Mg–8Gd–2Y–1Zn–6Li (wt%) alloy having a TYS of 202 ± 2.6 MPa, UTS of 243 ± 2.1 MPa and EL of 10.7 ± 2.3% was successfully fabricated by casting, heat treatment and hot extrusion. The effects of intermetallic compounds on microstructure and mechanical properties were deeply investigated. The results show that the studied alloy consists of coarse deformed α-Mg grains with (0001) basal texture, fine recrystallized β-Li grains with (002) texture and three Mg3RE phase variants, which are bulk Mg3RE phase with a size range of 10–30 µm, spot Mg3RE phase with a size range of 1–2 µm and spherical Mg3RE phase with a size range of 0.3–1 µm, respectively. The spherical Mg3RE phase has a strong dispersion strengthening effect, while the bulk Mg3RE phase acts as crack resources and deteriorates the ductility. A novel island-like <math>β1R</math> phase (FCC, a = 0.78 nm) is found for the first time in the Mg-Gd-Li based alloys. It has a coherent <math>(1̅12)β1R</math>//<math>(101̅0)α</math> interface at the broad facet and a semi-coherent <math>(1̅11)β1R</math>//<math>(112̅0)α</math> interface at the end facet. The <math>β1R</math> phase transforms from <math>βH</math> phase at the semi-coherent interface by atomic shear of RE and Mg atoms. The <math>β1R</math> phase provides a significant precipitation strengthening effect to the studied alloy, while the dissolution of <math>β1R</math> phase results in the age-softening phenomenon. The high-performance of the studied alloy is mainly attributed to the α/β duplex structure, three Mg3RE phase variants, and <math>β1R</math> phase.

Microstructures and Mechanical Properties of A New Biomedical Material Mg-13li-X Alloys

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

Microstructure and Mechanical Properties of A Newly Developed Low Young'S Modulus Ti-15zr-5cr-2al Biomedical Alloy

Microstructures and Mechanical Properties of As Cast Mg-Zr-Ca Alloys for Biomedical Applications

Microstructure And Mechanical Properties Of Mg-8li-4al-0.3y Alloys

In Vitro and in Vivo Studies on A Mg-Li-X Alloy System Developed As A New Kind of Biological Metal

Microstructure and Mechanical Behavior of As‐Cast, Extruded and Nanocrystalline Mg‐9Li‐3Al‐2.5Sr Alloy

Microstructure and mechanical properties of Mg–8Li–xAl–0.5Ca alloys

Mechanical Properties of the Extruded Mg-Zn-Mn-Ca Alloy for Biomedical Application

Microstructures and Mechanical Properties of Ultralight Cast Al-3Li-XMg-0.1Zr Alloys

Microstructure and Mechanical Properties of Mg–6Li–xAl–0.8Sn Alloys

Microstructural Characterization and Mechanical Properties of Mg-Zr-Ca Alloys Prepared by Hot-Extrusion for Biomedical Applications

Microstructures and mechanical properties of as-extruded Mg–8Gd–2Y–1Zn–6Li alloy

Microstructure and Mechanical Properties of Mg–4.0Zn–0.5Ca Alloy

Microstructure, Texture, and Mechanical Properties of As-Extruded Mg-xLi-3Al-2Zn-0.2Zr Alloys (x = 5, 7, 8, 9, 11 Wt%)

Influence of Extruding Temperature and Heat Treatment Process on Microstructure and Mechanical Properties of Three Structures Containing Mg-Li Alloy Bars

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications

Microstructure and Mechanical Properties of As-Cast and Extruded Biomedical Mg?Zn?Y?Zr?Ca Alloy at Different Temperatures

Microstructure and Mechanical Properties of As-extruded Mg-5Li-3Al-2Zn-xY Alloy

Microstructure and properties of biomedical Mg-Zn-Ca alloy at different extrusion temperatures

Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg–Li–(Al)–(RE) alloys for future cardiovascular stent application