Abstract:The reduction behavior of a sintered NiO/YSZ anode used for intermediate temperature solid oxide fuel cells was studied by hydrogen temperature-programmed reduction (H-2-TPR). The reduction process of the NiO/YSZ anode in the cell was in situ monitored by open circuit voltage (OCV) and electrochemical impedance spectroscopy (EIS). H-2-TPR results show that the higher sintering temperature of the NiO/YSZ anode results in a slower reduction of NiO to metallic Ni. However, when the sintering temperature is elevated to 1500 degrees C, the reduction of sintered NiO/YSZ anode powder instead becomes easier. The higher NiO content in the anode leads to the more rapid reduction of the corresponding anode powder. The above H2-TPR results can be attributed to the combined effects of the growth up of NiO particles and the interface separation between NiO and YSZ caused by the anode sintering. The variation of OCVs reveals that for the cells, the anode with higher NiO content has a slower reduction process, which can be ascribed to the retarding effect of excessive H2O produced during the initial reduction period. It was found from the EIS results that the 50% NiO/YSZ anode has a most stable reduction process, whereas for the cells with 30 % and 70 % NiO/YSZ anodes, both the polarization resistances gradually increase after experiencing an initial decrease for a short period. The cell polarization resistance with 30 % NiO/YSZ anode keeps no change any more after reduction for 600 min, whereas the cell polarization resistance with 70 % NiO/YSZ anode increases continuously.

Redox tolerance of thin and thick Ni/YSZ anodes of electrolyte-supported single-chamber solid oxide fuel cells under methane oxidation conditions

Redox of Ni/YSZ Anodes and Oscillatory Behavior in Single-Chamber SOFC under Methane Oxidation Conditions

Degradation of Ni-YSZ Electrodes in Solid Oxide Cells: Impact of Polarization and Initial Microstructure on the Ni Evolution

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

Catalytic Activity of Ni-YSZ Composite As Anode for Methane Oxidation in Solid Oxide Fuel Cells

Degradation of Solid Oxide Cells During Co-Electrolysis of Steam and Carbon Dioxide at High Current Densities

The Reduction Process of a NiO/YSZ Anode for Intermediate Temperature Solid Oxide Fuel Cells

Improved Microstructure and Performance of Ni-based Anode for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical performance and redox stability of solid oxide fuel cells supported on dual-layered anodes of Ni-YSZ cermet and Ni–Fe alloy

Rational Design of Superior, Coking-Resistant, Nickel-Based Anodes Through Tailoring Interfacial Reactions for Solid Oxide Fuel Cells Operated on Methane Fuel.

Sm0.2(Ce1−xTix)0.8O1.9 Modified Ni–yttria-stabilized Zirconia Anode for Direct Methane Fuel Cell

Performance and Durability of an Anode-Supported Solid Oxide Fuel Cell with a PdO/ZrO2 Engineered (La0.8sr0.2)0.95mno3-Δ-(y2o3)0.08(zro2)0.92 Composite Cathode

Redox Stability Optimization in Anode-Supported Solid Oxide Fuel Cells

Role of Initial Microstructure on Nickel-Ysz Cathode Degradation in Solid Oxide Electrolysis Cells

Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells

Quantitative Analysis of Micro Structural and Conductivity Evolution of Ni-YSZ Anodes During Thermal Cycling Based on Nano-Computed Tomography

Impact of yttria-stabilized zirconia contents in nickel cermet anodes for intermediate temperature-operated syngas-fueled thin film solid oxide fuel cells

Effect of Reduction Temperature on the Electrochemical Properties of a Ni/YSZ Anode-Supported Solid Oxide Fuel Cell

Operation of Ni-YSZ Anode Supported Solid Oxide Fuel Cell on Different Simulated Syngas

Microstructure Evolution Analysis of Ni/YSZ Cermet Electrode using Cross-Sectional Model Cells

Evaluation of Carbon Deposition Behavior on the Nickel/yttrium-Stabilized Zirconia Anode-Supported Fuel Cell Fueled with Simulated Syngas