Abstract:Texture and morphology evolution of modified Lanthanum Zirconium oxide (LaZr1.1Oy) films grown on biaxially textured Ni5%W tapes by chemical solution deposition (CSD) method at different heat-treatment conditions has been investigated. Results show that both the growth orientation and surface morphology of films are dependent on the heating rate and annealing temperature during heat-treatment process. Compared with the annealing temperature, heating rate shows a greater influence on the orientation growth of CSD-LaZr1.1Oy film. Slow heating rate is beneficial to a single (00l) orientation growth of LaZr1.1Oy grains on textured Ni-5at.%W (Ni5W) substrate. However, the surface morphology analysis reveals a minor effect of heating rate on the grain size and surface roughness of LaZr1.1Oy film. We consider that a slow heating rate would lead to the homogeneity nucleation of LaZr1.1Oy grains and eventually forming the great textured film due to the narrow temperature interval of the complete decomposition for LaZr1.1Oy precursor gel. In any case, high-quality LaZr1.1Oy film has been achieved at annealing temperature of 900 °C with heating rate of 2 °C/min. Moreover, we have grown epitaxial CeO2 film on the textured Ni5W substrate covered by LaZr1.1Oy film using CSD approach. CeO2 precursor solution was spin-coated on short sample of Ni5W/LZO and then heat-treated at 1000 °C for 30 min in Ar-4%H2. Detailed XRD and AFM studies indicate that CeO2 film has sharp bi-axial texture and smooth surface. These results demonstrate that a low-cost CSD LaZr1.1Oy film can act as a planarization template for the further production high Jc YBCO-superconducting film.

Tailoring the Crystallographic Orientation of MOD-derived La2Zr2O7 Buffer Layers for Coated Conductors

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Growth of Thick La2Zr2O7 Buffer Layers for Coated Conductors by Polymer-Assisted Chemical Solution Deposition

Fabrication and Characterization of La2Zr2O7 Films on Different Buffer Architectures for YBa2Cu3O7−δ Coated Conductors by RF Magnetron Sputtering

Polymer-assisted Chemical Solution Deposition of High-Quality La2Zr2O7 Buffer Layer Applied to Low-Cost YBCO-coated Conductors

Crucial role of oxygen-deficient LaMnO3-delta cap buffer layer in enhancement of current carrying capability of MOD-YBCO coated conductors

Growth of Simplified Buffer Template on Flexible Metallic Substrates for YBa2Cu3O Coated Conductors

Single Cerium Zirconate Buffer Layer on Biaxially Textured Metal Substrates for High Performance Coated Conductors

Preparation of High-Quality Conductive La0.7Sr0.3MnO3 Buffer Layer Applied to Low-Cost YBCO-Coated Conductors

Tailoring surface roughness of LaMnO 3 buffer layers for YBCO-coated conductors

Epitaxial growth of CSD modified lanthanum zirconium oxide buffer layer for coated conductors

Thickness Effect of Gd2Zr2O7 Buffer Layer on Performance of YBa2Cu3O7−δ Coated Conductors

A Compositional Gradient Ce1−xZrxO2 Buffer Architecture for Producing High-Performance YBCO Film

Preparation and Characterization of Ceo2/Ysz/Ceo2 Buffer Layers for Ybco Coated Conductors

Preparation of epitaxial La2-xGdxZr2O7 buffer layer for coated conductors using sol-gel method

Reel-To-Reel Deposition of Epitaxial Double-Sided Y2o3 Buffer Layers for Coated Conductors

Preparation of Gd2zr2o7 Buffer Layers for Coated Conductor by Polymer-Assisted Chemical Solution Deposition

The influences of rapid growth of yttria-stabilized ZrO_2 buffer layers for YBCO coated conductors

Reel-To-Reel Continuous Deposition Of Ce(X)Zr(1-X)O(2) Single Buffer Layer For Ybco Coated Conductors

Fabrication of YBCO Coated Conductors on Biaxial Textured Metal Substrate by All-Sputtering