Abstract:This study demonstrates the use of continuous supercritical hydrothermal synthesis (CSHS) for producing active and stable nickel nanocatalysts employed in supercritical water gasification (SCWG), which generates hydrogen-rich syngas from biomass. The investigation focused on synthesizing a catalyst material comprising active nickel and a magnesium/aluminum-mixed additive using CSHS. The impact of synthesis temperature on the properties of the product was initially assessed by synthesizing a series of Ni-Mg-Al mixed particles at temperatures ranging from 350 to 500 °C under a constant pressure of 25 MPa. Needle-like nanocrystal bundles mainly composed of AlOOH were successfully obtained, exhibiting high specific surface areas (88–119 m2/g) and demonstrating highly dispersed Ni, Mg, and Al elements as confirmed by TEM-EDS analysis. Increasing the temperature of CSHS resulted in higher product crystallinity and an increased conversion rate of Ni2+ precursor, from 87.4 % at 350 °C to 95.9 % at 500 °C. Another series of Ni/Mg-Al-O catalysts with varying Mg/Al contents was synthesized at 500 °C and 25 MPa, and evaluated for SCWG of 5 wt% glucose at 500 °C. Due to the well-dispersed components, these catalysts exhibited remarkable and identical activities, resulting in a significant increase in H2 yield from 0.9 mol/mol without a catalyst to 3.4–3.9 mol/mol, as well as an enhancement in carbon gasification efficiency from 24.6 % to 71.3–72.9 %, when loaded with a catalyst loading of 10 wt% glucose. An optimized composition of Mg/Al was determined, comprising 30 % Mg2+ and 40 % Al3+ species, due to the formation of an appropriate quantity of Mg-Al crystalline species through the CSHS approach. This catalyst exhibited the highest specific surface area and demonstrated remarkable stability in terms of crystalline and pore structures during the SCWG use. We conclude that CSHS is an effective approach for synthesizing active and stable metal nanocatalysts with excellent property stability for SCWG applications.

Preparation of Syngas Via Catalytic Gasification of Biomass with a Nickel-based Catalyst

Syngas production by two-stage method of biomass catalytic pyrolysis and gasification

Syngas Characteristics From Catalytic Gasification of Polystyrene and Pinewood in CO2 Atmosphere

CO Rich Syngas Production from Catalytic CO2 Gasification-Reforming of Biomass Components on Ni/CeO2

Catalysis/sorption enhanced pyrolysis-gasification of biomass for H 2 -rich gas production: Effects of various nickel-based catalysts addition and the combination with calcined dolomite

Syngas production by catalytic pyrolysis of rice straw over modified Ni-based catalyst

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Production of Syngas Via Partial Oxidation and CO2Reforming of Coke Oven Gas over a Ni Catalyst

Syngas Production Via Combined Oxy-Co2 Reforming of Methane over Gd2O3-modified Ni/SiO2 Catalysts in a Fluidized-Bed Reactor

Hybrid-functional Material for Sorption-Enhanced Hydrogen-Rich Syngas Production from Biomass: Effect of Material Preparation Process

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Effective Catalytic of Rice Straw Pyrolysis over Ni/CaZnAl Catalyst for Producing Hydrogen-Rich Syngas

Investigating the effect of nano-nickel-based catalyst Ni-Me/HZSM-5 on in situ catalytic pyrolysis of distillers dried grains with solubles

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Study on Methanation Performance of Biomass Gasification Syngas Based on a Ni/Al2O3 Monolithic Catalyst

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

A Novel Nickel Catalyst Supported on Activated Coal Fly Ash for Syngas Production Via Biogas Dry Reforming

Nickel-loaded red mud catalyst for steam gasification of bamboo sawdust to produce hydrogen-rich syngas

Nickel nanocatalysts prepared via continuous supercritical hydrothermal synthesis for supercritical water gasification

Biogas Dry Reforming for Syngas Production: Catalytic Performance of Nickel Supported on Waste-Derived Sio2

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor