Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

Complex Turbulent Flow and Heat Transfer Characteristics of Tubes with Internal Longitudinal Plate-Rectangle Fins in EGR Cooler

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Study on turbulent flow and heat transfer performance of tubes with internal fins in EGR cooler

Flow and heat transfer performances of tubes with internal longitudinal plat-rectangle fins

Flow and Heat Transfer Characteristics of a Double-Tube Structure Internal Finned Tube with Blossom Shape Internal Fins

Turbulent Heat Transfer Performance of Internally Longitudinally Finned Tubes

Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows

Convective Heat Transfer and Pressure Drop of Annular Tubes with Three Different Internal Longitudinal Fins

Convective Heat Transfer and Pressure Drop of a Tube with Internal Longitudinal Fins

Experimental Study on the Pressure Drop and Heat Transfer Characteristics of Tubes with Internal Wave-Like Longitudinal Fins

Laminar heat transfer characteristics of internally finned tube with sinusoidal wavy fin

Experimental Study on the Pressure Drop and Heat Transfer of Two Different Tubes With Plain-Rectangle Internal Fins

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Heat transfer of laminar oscillating flow in finned heat exchanger of pulse tube refrigerator

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Experimental and numerical investigation on the flow and heat transfer characteristics of the tube with an integrated internal longitudinal fin

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Experimental Investigation on Heat Transfer and Flow Friction Characteristics in Three Types of Plate Fin-and-Tube Heat Exchangers

Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow