Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Study on operation parameters of capacitive deionization to reclaimed water treatment

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Application and Optimization of Capacitive Deionization Technology in Seawater Desalination

Towards long-term operation of flow-electrode capacitive deionization (FCDI): Optimization of operating parameters and regeneration of flow-electrode

Recent Advances in Capacitive Deionization: Research Progress and Application Prospects

Experimental and theoretical study of a new CDI device for the treatment of desulfurization wastewater

Application of capacitive deionization technology in water treatment and coupling technology: A review

Application of Capacitive Deionization in Water Treatment and Energy Recovery: A Review

Performance of flow-through mode capacitive deionization device with activated carbon felt electrode

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Preparation and Application of Electrodes in Capacitive Deionization (CDI): a State-of-Art Review

Particle size distribution influence on capacitive deionization: Insights for electrode preparation

Effect of ion exchange resin membranes and activated carbon electrodes in water desalination using capacitive deionization technique with saline streams

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Capacitive deionization for water desalination: Cost analysis, recent advances, and process optimization

Electrochemical capacitive desalination behavior of activated carbon fibers

Study on the Desalination and Regeneration Performance of PBA/AC Electrode Enhanced by MCDI

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

New Operational Modes to Increase Energy Efficiency in Capacitive Deionization Systems

Inversion phenomenon and effective charging quantity in capacitive deionization device