Abstract:A full-flow ball penetrometer is now routinely used in centrifuge testing for characterizing single-layer clay, silt, sand, and stratified soil samples. The behavior of the standard ball penetrometer (including the shaft) used in the field, penetrating through single and two-layer uniform clays, has recently been investigated. However, the ball penetrometers used in centrifuge testing has either a similar or higher area ratio (of the shaft to the ball) and significantly greater equivalent prototype diameter compared with the standard one used in the field. The thickness of the soil layers, however, are scaled accurately mimicking strength profiles in the field, leading to lower relative thickness of the soil layers. Large deformation finite element (LDFE) analyses were, therefore, carried out for the centrifuge ball penetrometers to investigate its performance in characterization of single-and double-layer clays. The results were validated against plasticity solutions and other previously published finite element (FE) results prior to undertaking a detailed parametric study, exploring a range of normalized soil properties and layer thickness. Three commonly used centrifuge balls were studied. For single-layer uniform clay, the area ratio of shaft to ball was shown to have significant influence on the deep bearing factors and the critical penetration depth of attaining that factor. For two-layer uniform clays, the undrained shear strength of the top layer was mostly underestimated because of the lower thickness of that layer relative to the centrifuge ball diameter. In addition, the shear strength of the bottom layer was mostly overestimated because of trapping of stiff clay at the base of the ball, advancing in stiff-over-soft clay deposits. To interpret a reference undrained strength profile, taking into account the scale effects of the penetrometer relative to layer thickness, a framework has been proposed accounting for these effects, with the LDFE data used to calibrate the framework. (C) 2016 American Society of Civil Engineers.

Behaviour of ball penetrometer in uniform single- and double-layer clays

Scale Issues and Interpretation of Ball Penetration in Stratified Deposits in Centrifuge Testing

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Estimation of Undrained Shear Strength in Rate-Dependent and Strain-Softening Surficial Marine Clay Using Ball Penetrometer

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Behaviors of Drag Embedment Anchor in Layered Clay Profiles

Evaluation of Undrained Shear Strength of Surficial Marine Clays Using Ball Penetration-Based CFD Modelling

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Large-Deformation Analyses

Numerical investigations into cycling of full-flow penetrometers in soft clay

Soil flow mechanisms of full-flow penetrometers in layered clays through particle image velocimetry analysis in centrifuge test

Investigation of Penetration Process of Three Full-flow Penetrometers in Marine Soft Clay

An improved evaluation method for the undrained shear strength of uniform soft clay in the nonfull flow state based on ball penetration simulations

Interpretation of Piezoball Dissipation Testing in Clay

A Fluid Mechanics Approach to Evaluating Marine Soft Clay Strength by a Ball Full-Flow Penetrometer

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

Estimation of Effective Internal Friction Angle by Ball Penetration Test: Large-Deformation Analyses

Improved Predictive Model for the Strength of Fluidized Seabed Sediments with Rate Effect Characteristics by Full-Scale Spherical Penetrometer Tests

The Strength Assessment for T-bar Penetrometer Tests at Shallow Embedment in Clay considering Strain Softening