Abstract:The piezocone (CPTu) dissipation test is used to characterize how the applied load from the penetrating cone is distributed between the soil and pore fluid during both penetrometer advancement and when penetration is paused. The coefficient of consolidation is often estimated from CPTu dissipation tests by interpreting the rate of excess porewater pressure ( ∆u ) decay to static conditions during a pause in cone penetration. Most CPTu dissipation test interpretation methods are based on Terzaghi consolidation theory for ∆u dissipation at the cone shoulder ( u2 position) or cone face ( u1 position) and assume that radial ∆u dissipation dominates the response. However, several recent studies show that vertical ∆u migration does contribute to the response. This study uses a large deformation direct axisymmetric cone penetration model to characterize the soil-water mechanical response during CPTu dissipation tests, and in particular, the role of vertical ∆u dissipation on the response at the u1 and u2 positions. Large deformations around the penetrating cone are accommodated with an Arbitrary Lagrangian Eulerian approach. Soil behavior is modeled with the MIT-S1 constitutive model calibrated for Boston blue clay (BBC) soil behavior. ∆u dissipation following undrained cone penetration is simulated with coupled consolidation for BBC with over-consolidation ratios (OCR) of 1, 2, and 4 and a range of hydraulic conductivity anisotropy. The simulated u1 and u2 dissipation responses are presented to study how they are affected by OCR and hydraulic conductivity anisotropy. A correction factor is recommended to account for hydraulic conductivity anisotropy when interpreting the horizontal coefficient of consolidation from CPTu dissipation tests.

Interpretation of Piezoball Dissipation Testing in Clay

Numerical study of piezoball dissipation test with penetration under partially drained conditions

Model Tests and Parametric Analysis on Pore Pressure Response in Silty Clay Seabed under Vertical Caisson Breakwater

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

Investigation of piezocone dissipation test interpretation in clay accounting for vertical and horizontal porewater pressure dissipation with a large deformation axisymmetric penetration model

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Non-monotonic Piezocone Dissipation Curves of Backfills in a Soil-Bentonite Slurry Trench Cutoff Wall

Cone Penetration-Induced Pore Pressure Distribution and Dissipation

Numerical investigations into cycling of full-flow penetrometers in soft clay

Large-Deformation Analyses

Influence of Penetration Rate on Full-Flow Penetrometer Resistance in Underconsolidated Clay

Interpreting strength parameters of strain-softening clay from shallow to deep embedment using ball and T-bar penetrometers

Coefficient of consolidation measured by cone penetration tests in overconsolidated cohesive soils

Resistance of full-flow penetrometers in rate-dependent and strain-softening clay

A Destructive Field Study on the Behavior of Pile under Ten

Strength interpretation parameter of piezoncone penetration test for soft clay in offshore area of Hangzhou Bay

Investigation of Penetration Process of Three Full-flow Penetrometers in Marine Soft Clay

Soil flow mechanisms of full-flow penetrometers in layered clays through particle image velocimetry analysis in centrifuge test