Abstract:The fiber devices are sensitive to the radiation, and all of the devices used for inter-satellite optical communication are always exposed in radiation environment, so the feasibility of EDFA which is the key component of the external modulate technique must be analyzed in this environment before it is able to used in inter-satellite optical communication systems. The most important components of EDFA including the EDF, optical isolators and WDM couplers were irradiated with 60Co gamma rays to simulate the radiation environment of the low dose orbits and the high dose orbits for the first time at home. The experiment results indicate that in the radiation environment of the low dose orbits whose typical total dose is about 5krad, when the input power of EDFA keeps-2dBm, the output power comes down to 14dBm from the initial 14.3dBm. And the optical isolators and WDM couplers change little. So the EDFA can be used directly on the low dose orbits. But in the radiation environment of the high dose orbits whose typical total dose is about 1000krad, at the same condition, the output power of EDFA comes down to-25.3dBm. And although optical isolators also change little, the additional insertion loss of WDM couplers jumps up to 8dB. So the characters of the EDFA degrade badly. If EDFA was used on the high dose orbits, it must be radiation protected.

Simulation Approach for the Design of Radiation-Hardened Erbium Doped Fiber Amplifiers

Homemade radiation-resistant Er/Yb co-doped silica fiber for space applications in low and high-dose radiation environments

Design Optimization of Yb-doped Fiber Lasers for Operation in Radiation Environments

Space radiation effect on the characters of fiber amplifiers for space optical communication

Experimental investigation of radiation effect on erbium-ytterbium co-doped fiber amplifier for space optical communication in low-dose radiation environment.

Investigation of the Irradiation Effect on Erbium-Doped Fiber Amplifiers Composed by Different Density Erbium-Doped Fibers

Active Measuring Method for Investigating the Irradiation Effect on the Gain Characteristics of an Erbium-Doped Fiber Amplifier in Inter-Satellite Optical Communication

Transmission Performance Analysis of Fiber Optical Parametric Amplifiers for Wdm System

Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment

Simulation on Thermal Load Gradient Mitigation with Auxiliary Multi-Seeds Amplification in Fiber Amplifier

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Analysis of the Asymmetry of Erbium-Doped Fiber Length in Fiber RF Transmission

Gain and Noise in Ytterbium-Sensitized Erbium-Doped Fiber Amplifiers: Measurements and Simulations

A New Simple Model for EDFA Incorporated in the Irradiated Environment for Inter-Satellite Optical Communication

Numerical Analysis of Stimulated Inelastic Scatterings in Ytterbium-Doped Double-Clad Fiber Amplifier with Multi-Ns-duration and Multi-Hundred-kw Peak-Power Output

Design optimization for efficient erbium-doped fiber amplifiers

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Space Radiation Effect on Edfa for Inter-Satellite Optical Communication

Radiation-hardened optical amplifier based on multicore fiber for telecommunication satellites

Analysis of the space radiation effect on EDFA for inter-satellite optical communication

Simulation-assisted Methodology for the Design of Fiber-based Dosimeters for a Variety of Radiation Environments