Abstract:A finite-difference time-domain (FDTD) simulation of Yb-doped cladding-pumped, mJ-level, excitation-balanced fiber pulse amplifiers (EBFAs) is presented. In EBFAs, two pumps, one above (anti-Stokes pump, or ASP) and one below (Stokes pump, or SP) the signal wavelength, are utilized to reduce the net thermal energy generated due to the quantum defect. From the results of the FDTD simulation, detailed analyses on the fiber length optimization, excited Yb3+ population evolution, pump and signal power evolution, optical-to-optical (o-o) conversion efficiency, wall plug efficiency, as well as thermal energy generation are performed. For example, with an ASP at 990 nm and a SP at 975 nm, only 2.3 µJ of thermal energy is produced when generating a 2 mJ output pulse at 985 nm, whereas a pulse amplifier with only SP pumping rendering the same 2 mJ output gives more than 10 times the thermal energy. In the meantime, the system maintains an o-o efficiency of 8.43% and wall plug efficiency of 6.6%. The results here indicate the feasibility of the power-scaling of excitation-balanced laser systems, and the FDTD model will be beneficial for the design and optimization of such systems. The first half of this paper presents the FDTD model and provides an example calculation outlining the modeling procedure. The remaining half details the impact of varying laser parameters on system performance. These include pumping and input signal energies, repetition rates, and selection of the ASP, SP, and signal wavelengths. The results presented herein can also be extended to excitation balancing in other solid-state laser systems, such as Yb:YAG and Tm:YAG lasers.

Gain and Noise in Ytterbium-Sensitized Erbium-Doped Fiber Amplifiers: Measurements and Simulations

Experiment-based model of Er/Yb gain medium for fiber amplifiers and lasers

Model Results of Er-Yb Double Clad Fiber Amplifier

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Theoretical Analysis on Gain Characteristics of Ytterbium-Doped Fiber Amplifier

Modeling and Experiments of the Gain and Noise Figure for an Irradiated Erbium-Ytterbium Co-Doped Fiber Amplifier

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Noise performance of erbium-doped fiber amplifier pumped at 1.49 mu m, and application to signal preamplification at 1.8 Gbit/s

Optimal design of Er/Yb co-doped fiber amplifiers with an Yb-band fiber Bragg grating

Characteristics of the bandwidth in gain-clamped erbium-doped fiber amplifiers

FDTD modeling of excitation-balanced, mJ-level pulse amplifiers in Yb-doped double-clad optical fibers

Inhomogeneous Gain Saturation in EDF: Experiment and Modeling

Amplification and Spontaneous Emission of Er-doped Fiber Both in Theory and Experiment

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Design optimization for efficient erbium-doped fiber amplifiers

Gain and noise characteristics of phosphate glass Er^3+ – Yb^3+ co-doped waveguide amplifiers

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

The theoretical analysis and simulation of double cladding Er/Yb Co doped optical fiber laser

Analysis and characterization of Er-Yb codoped-depressed inner cladding fiber

Temperature Dependence of Ytterbium-Doped Tandem-Pumped Fiber Amplifiers