Abstract:High‐efficiency bismuth‐doped germanosilicate fiber for E+S band amplification is presented, which achieves 48.5 dB gain using just 12 m. A substantial optimization procedure and analysis of how different fabrication parameters impact the fiber performance is provided. New observations and analysis are conducted on how variations in oxygen vacancies and bismuth content impact BGDFs' luminescence intensity and lifetime. Bismuth‐doped fibers (BDFs) are renowned in wideband amplification due to their numerous gain bands, such as O, E, S, and U. However, the low amplification coefficient and excessive usage length hinder its further application, how to achieve a high amplification coefficient remains an unresolved challenge. In this study, a high‐efficiency bismuth‐doped germanosilicate fiber (BGDF) for E+S band amplification is developed using modified chemical vapor deposition (MCVD) combined with the solution doping technique. The BGDF achieves a gain of 48.5 dB using a length of only 12 m. The effects of bismuth active centers (BACs) and unsaturable loss (UL) determined by fiber drawing parameters and bismuth concentrations on amplification properties of the BGDFs are discussed. New observations and analysis are conducted on how variations in oxygen vacancies and the bismuth concentration impact BGDFs' luminescence intensity and lifetime. A successful optimization approach is devised to increase BACs levels and decrease UL by modifying drawing parameters and the bismuth concentration to facilitate the formation of low‐valence bismuth and oxygen vacancies. The results suggest that BGDFs are significant for the future expansion of the gain band to the E+S band.

Inhomogeneous Gain Saturation in EDF: Experiment and Modeling

Gain and Noise in Ytterbium-Sensitized Erbium-Doped Fiber Amplifiers: Measurements and Simulations

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Absorption and Gain Saturable Nonlinearities in Erbium-Doped Optical Microcavities

Analysis of Gain Competition Suppression in Multiwavelength Actively Mode-Locked Erbium-Doped Fiber Lasers Incorporating a Highly Nonlinear Fiber

Experiment-based model of Er/Yb gain medium for fiber amplifiers and lasers

Realizing 48.5 dB Gain in the E+S Band Using 12 m Bismuth‐Doped Fiber

Modeling and Experiments of the Gain and Noise Figure for an Irradiated Erbium-Ytterbium Co-Doped Fiber Amplifier

Numerical Analysis of Concentration Quenching Model of Er/sup 3+/ -Doped Phosphate Fiber Amplifier

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Amplification and Spontaneous Emission of Er-doped Fiber Both in Theory and Experiment

Model Results of Er-Yb Double Clad Fiber Amplifier

Gain Effect and Amplification Characteristics Analysis in Fiber Chirped Pulse Amplification Systems

Modeling A Broadband Bismuth-Doped Fiber Amplifier

Modeling EDFA Gain: Approaches and Challenges

A broadly tunable erbium-doped fiber ring laser: experimentation and modeling

Simple model for the erbium-doped fiber amplifiers (EDFA)

High gain and low noise O+E bands fiber amplification based on hybrid bismuth-doped fiber

Modeling of Er&#x000B3;+-Ce&#x000B3;+-Doped Telluride Fiber Amplifier

Experimental comparison of E-band BDFA and Raman amplifier performance over 50 km G.652.D fiber using 30 GBaud DP-16-QAM and DP-64-QAM signals