Abstract:A segmented-cladding fiber (SCF) has a uniform core of high refractive index and a cladding consisting of alternating high and low refractive-index angular segments. It is known that such a fiber can be designed to provide effective single-mode operation with an ultra-large core size. In this paper, we analyze a SCF that is doped with erbium ions in its high-index regions (i.e., the core and the high-index cladding segments). The core of the fiber has a diameter of 20 pin and the cladding consists of 8 segments of equal size. The concentration of the erbium ions is 1 x 10(26). We calculate the mode-field distributions in the fiber at the signal (1530 nm) and the pump (980 nm) wavelength with the finite-element method. We obtain the gain characteristics and the pump efficiency of the fiber by solving the propagation rate equations. Assuming an initial signal power of 1 mu W, the threshold pump power required is 102 mW for a 30-cm long fiber. The optimal gain of the fiber is 25 dB, which can be achieved with a fiber length of 26 cm and a pump power of 150 mW. Our results confirm that a properly designed SCF can provide highly efficient optical amplification with a short length.

Characteristics of the bandwidth in gain-clamped erbium-doped fiber amplifiers

The Global Analysis for an All-Optical Gain-Clamped L-band Erbium-Doped Fiber Amplifier Using a Single Fiber Bragg Grating

Theoretical Analysis on Gain Characteristics of Ytterbium-Doped Fiber Amplifier

Gain and Noise in Ytterbium-Sensitized Erbium-Doped Fiber Amplifiers: Measurements and Simulations

The Characteristic Investigation of Gain-clamped EDFA

Theoretical analysis of gain-clamped results for an EYDFA

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

An Erbium-Doped Fiber Amplifier With Tunable Gain-Clamping in the Extended L-Band

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

Modeling of Er&#x000B3;+-Ce&#x000B3;+-Doped Telluride Fiber Amplifier

Numerical Analysis of Concentration Quenching Model of Er/sup 3+/ -Doped Phosphate Fiber Amplifier

Analysis of Erbium-Doped Segmented-Cladding Fiber for Optical Amplification

Simple model for the erbium-doped fiber amplifiers (EDFA)

Gain performance and gain modulation of 980nm-pumped erbium-doped fibre amplifiers

Model Results of Er-Yb Double Clad Fiber Amplifier

Optimization Of Broadband Gain Spectra Of Cr4+:Yag Crystal Fiber Amplifier

Low noise characterization of gain-clamped erbium-doped fiber ring-lasing amplifiers

<formula formulatype="inline"><tex Notation="TeX">${\hbox {Er}}^{3+}-{\hbox {Tm}}^{3+}$</tex></formula>-Codoped Tellurite Fiber Amplifiers for WDM Systems: A Theoretical Analysis of BER and Bandwidth

Gain Characteristics of Er~(3+)/Yb~(3+) Co-Doped Waveguide Amplifiers

Theoretical Analysis of Gain Characteristics of Dy3+-doped Fiber Amplifiers

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers