Abstract:This paper investigates the leakage characteristics of brush seals including the flow field characteristic of brush seal and the effects of structural parameters on the leakage characteristic of brush seals with the consideration of bristle deflection. The flow field characteristic of brush seal was discussed based on three-dimensional (3-D) computational model of brush seal, two-way fluid–structure interaction and moving grid technique. Then the effect of structural parameters on the leakage characteristic of brush seals was investigated from theoretical and numerical simulation perspectives with the emphasis on an improved prediction formula of leakage flow rate of brush seals. As illustrated in the analysis of the leakage characteristics of brush seals, (1) the leakage with the influence of bristle deflection is closer to the results of experiment relative to that without bristle deflection, and increases with the increasing inlet/outlet pressure ratios, which validate the developed 3-D computational model with bristle deflection to be more reasonable; (2) the flow field characteristics (pressure and velocity) of brush seal are revealed reasonably; (3) with the increasing of the height of backing plate fence, the clearance of brush wire and the axial clearance between brush bristle and back plate, the leakage factor rises and then reaches a stable value when the clearance of brush is larger than 0.3 mm; moreover, (4) with the increase of brush wire diameter, the leakage factor decreases firstly and then tends to stabilization, while rapidly decreases at first, then slowly decreases, and lastly tends to a value when the bristle row number increases; (5) the reliability and accuracy of the proposed prediction equation for brush seals is validated to be high by the CFD computational results. The efforts of this paper provide a useful theoretical and numerical method to clearly understand the leakage characteristics of brush seal, which is beneficial to improve the design of brush seals.

Research on No-Contact Hydraulic Dynamic Seal Characteristic Based on CFD

Analysis of force and leakage in water hydraulic motor' s piston pairs

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Experimental and Numerical Investigations on Leakage Flow Characteristics of Two Kinds of Brush Seals

NUMERICAL ANALYSIS OF LEAKAGE FLOW THROUGH TWO LABYRINTH SEALS

Numerical Study of the Fluid Forces for a Whirling Annular Seal: CFD Simulation Versus Experiment

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

Numerical Investigation of Sealing Clearance on Leakage Flow Characteristic of Low-hysteresis Brush Seal

Study on a Type of Low-Leakage Brush Seal Porous Media Model

Numerical Analysis on Influence of Radial Clearance on Leakage Flow Characteristics of Brush Seal

Three-Dimensional Coupling Analysis of Flow and Thermal Performance of A Mechanical Seal

Study on hydrostatic gas lubricated non-contacting mechanical seal

Theoretical and Numerical Investigation on the Leakage Characteristics of Brush Seals Based on Fluid–structure Interaction

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Effects of Clearances on the Leakage Flow Characteristics of Two Kinds of Brush Seals and Referenced Labyrinth Seal

Numerical Simulation on Rotordynamic Characteristics of Annular Seal under Uniform and Non-Uniform Flows

Numerical Investigations of Leakage Performance Degradations in Labyrinth and Flexible Seals Due to Wear

Dynamic Leakage Analysis of Noncontacting Finger Seals Based on Dynamic Model

Research on Flow Characteristics of Negative Dislocated Seal

Studies of Exit Pressure Recovery Coefficient and Its Effects on Dynamic Characteristics of Annular Water Seals

Study on contact characteristics between seal and door based on direct restriction