Abstract:As a key component of direct methanol fuel cells (DMFCs), proton exchange membranes (PEMs) are required to be mechanically robust, methanol-resistant, and conductive to protons. In this work, a novel sulfonated poly (ether ether ketone) (SPEEK) impregnated poly(vinylidene fluoride) (PVDF) electrospun nanofiber membrane was prepared. To avoid the collapse of PVDF fiber framework by the solvent of SPEEK, we designed a SPEEK/solvent/nonsolvent ternary filling system through the cloud point titration curves. Meanwhile, polydopamine (PDA), an extraordinarily adhesive and hydrophilic material, was coated on the surface of PVDF nanofibers to further improve the interface bonding between SPEEK and PVDF. The introduction of PVDF nanofibers completely changed the rigidity of SPEEK thus achieving a 5.4-fold increase of toughness when compared with that of pure SPEEK at dry state. Notably, significantly improved methanol barrier ability was also obtained due to the tortuous methanol crossover pathways caused by the embedded PVDF nanofibers. In the DMFC tests, the ultralow methanol permeability and relatively high proton conductivity of the obtained composite membrane made it could be operated with 5 M methanol fuel and showed a peak power density of 104.0 mW cm(-2), which was higher than the values of 89.3 mW cm(-2) (2 M methanol) and 84.0 mW cm(-2) (5 M methanol) recorded with commercial Nafion 115 membrane.

A Passive Vapor-Feed Direct Methanol Fuel Cell Based on a Composite Pervaporation Membrane

Passive Fuel Delivery Based on Hydrophobic Porous Silicon for Micro Direct Methanol Fuel Cells

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

Capillary-based Water Removal Cathode for an Air-Breathing Micro Direct Methanol Fuel Cell

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

A Micro Direct Methanol Fuel Cell Using PDMS Assembly Technology

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Design and Fabrication of Fuel-Self-Propelled Reaction Device for Passive Micro Direct Methanol Fuel Cell Anodes

A Monolithic Integrated Micro Direct Methanol Fuel Cell Based on Sulfo Functionalized Porous Silicon

A micro-direct methanol fuel cell stack with optimized design and microfabrication

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

A breakthrough in the performance and fuel utilization of methanol microfluidic fuel cell via viscous co-flow electrolyte

A Spontaneous and Passive Waste-Management Device (PWMD) for a Micro Direct Methanol Fuel Cell

Two-phase mass transfer in a vapor-fed microfluidic fuel cell

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst