Abstract:This research focuses on the influence of silicon alloys in hot-rolled steel strips. The steel used in the study was obtained from a hot rolling process with different silicon contents of 0.01, 0.1, 0.2, and 0.3 wt.%. The as-received oxide scale on the hot-rolled steel surface was completely removed by SiC paper and re-oxidized in a horizontal furnace with an atmosphere of 17% H2O-N2 at temperatures of 600°C, 650°C, and 700°C for 10 seconds. An investigation of scale adhesion can be done using a tensile testing machine with a CCD camera. The adhesion of the oxide scale to the steel surface was recorded on video. The oxide phase was examined by means of X-ray diffraction (XRD). The microstructure and thickness of the oxide scale were examined by a scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS). The results indicated that all steels studied produced oxide scales that consisted of hematite (Fe2O3) and magnetite (Fe3O4), which contained iron (Fe). The scale thickness tends to increase with increasing temperature, while thickness decreases with increasing Si content in steel. The oxide scale adhesion was indicated by the strain initiating the first spallation during tensile load. The results showed that the strain initiating the first scale spallation tends to decrease with increasing temperature, while scale adhesion increases with increasing Si content in steel. The mechanical adhesion of the oxide scale to the steel substrate was considered in terms of energy. The results indicate that the scale adhesion of steel with 0.3 wt.% Si was higher than that in another sample. It was possible that the presence of an oxide that contains Si at the scale-steel interface, which encourages scale adhesion. The mechanical adhesion energy of the oxide scale was shown in the range of 2-20 J/m2. The qualitative assessment of scale adhesion in terms of strain initiating the first spallation and mechanical adhesion energy suggested the good adhesion behavior of scale grown in the hot-rolled steel with 0.3 wt.% Si. This result indicates that scale formed on steel with a high silicon content tends to be difficult to remove. There was a need to control the Si content in the hot-rolled steel in a satisfactory way to save energy during the de-scale process.

Effects of Oxide Scale on Industrial Atmosphere Corrosion of Low Carbon Steels

Effect of Oxide Scale Microstructure on Atmospheric Corrosion Behavior of Hot Rolled Steel Strip

Effect of Hot-Rolled Oxide Scale on Dry/Wet Cyclic Corrosion Behavior of Q370qNH Steel in Simulated Industrial Atmosphere Environment

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Role of oxide scale on the localised corrosion of low carbon steel pipeline in cooling system

Experimental Study on Adhesion of Oxide Scale on Hot-Rolled Steel Strip

Characterization of Oxide Scales Formed on Plain Carbon Steels in Dry and Wet Atmospheres and Their Eutectoid Transformation from FeO in Inert Atmosphere

Effect of microstructure and microtexture evolution of oxide layer over J82B steel on mechanical descaling properties

Isothermal Structure Transformation and Kinetics Behavior of Oxide Scale on Low Carbon Steel

Descaling Abilities of Two Low-Alloy High-Strength Steels Under Different Heating Processes

Effects of Oxide Scale on the Corrosion and Mechanical Properties for a High Speed Steel and a Graphite Cast Iron

A Study of the Mechanism of Formation of Composite Oxide Scale on Heat-Resistant Steel 25Cr18Ni9Si2

EFFECT OF TEMPERATURE ON PROPERTIES OF CO2 CORROSION SCALE OF N80 CARBON STEEL

Influence of Corrosion Scale on Cast Iron under the Change of Water Qualities

Oxide Scale Formation on Low-Carbon Steels in Future Reheating Conditions

Influence of Silicon on Oxidation and Adhesion of Oxide Scale on Hot-Rolled Steel Strips

Effect of carbon on isothermal reduction of high-strength steel oxide scale in 30%H2–N2 atmosphere

Oxidation Kinetics and Spallation Model of Oxide Scale during Cooling Process of Low Carbon Microalloyed Steel

Effect of H2S concentrations on corrosion failure of L245NS steel in CO2-O2-H2S system