Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

Novel high-performance SRAM cell design using 9T

A 256kb 9T Near-Threshold SRAM With 1k Cells per Bit-Line and Enhanced Write and Read Operations

A FinFET based low-power write enhanced SRAM cell with improved stability

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Performance Analysis of 6T and 9T SRAM

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

Analysis of a read disturb-free 9T SRAM cell with bit-interleaving capability.

Design of dual port 9T SRAM cell with parallel processing and high performance computing

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Novel Robust and Low-Leakage SRAM Cell with Nine Carbon Nanotube Transistors

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

Two-Direction In-Memory Computing Based on 10T SRAM With Horizontal and Vertical Decoupled Read Ports

9T fast‐write SRAM bit cell with no conflicts for ultra‐low voltage

Reliable single-ended ultra-low power GNRFETs-based 9T SRAM cell with improved read and write operations

An Improved Data-aware Structure Sub-threshold SRAM

Low-leakage 9-CN-MOSFET SRAM Cell with Enhanced Read and Write Voltage Margins

Robust 6T Si tunneling transistor SRAM design

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Charge recycling 8T SRAM design for low voltage robust operation

Independently-Controlled-Gate FinFET 6T SRAM Cell Design for Leakage Current Reduction and Enhanced Read Access Speed

8T1R: A Novel Low-power High-speed RRAM-based Non-volatile SRAM Design.