Abstract:This paper proposes a novel method for the modulation and fabrication of an aspherical microlens from a photocurable polymer for use in optical pickup heads. This novel modulation method can be employed not only to dynamically control the focal length and morphology of the microlens but also to fabricate aspherical lenses after UV curing of the photosensitive polymer. Forces in two dimensions provided by electrowetting and gradient electrostatic forces are applied to shape the polymer liquid from a hemispherical shape into a parabolic or a near- conical shape. Aspherical microlenses are designed based on constant optical-path-length theory and self-aligned by surface- tension forces. For morphology modulation, 2-D voltages are applied at the lower electrodes and between the upper and lower substrates, respectively, on a SU-8 spherical liquid-polymer droplet. The voltage applied at the lower electrodes provides an electrowetting effect on the polymer droplets, thereby reducing the contact angle of the spherical droplet, resulting in a desirable droplet height/baseline ratio for a desirable focal length. The voltage applied between the upper and lower substrates pulls up the droplet mostly at its center portion to form an aspherical shape that is close to a parabolic shape or even a conical shape. As a result, the Strehl ratio of the lens can be varied from 0.0076, as with a spherical shape, to 0.8362, as with a near-parabolic shape, and the focal-spot size can be reduced from 2.302 to 0.778 mum. The proposed method has been successfully implemented and has proven suitable for optical applications in which millimeter-diameter-size lenses with numerical apertures higher than 0.66 and focus-spot resolutions better than 0.8 mum are preferred.

Micro Lens Actuator And Polymer Objective Lens For Optical Pickup

A two-dimensional silicon-on-glass actuator with dispensed polymer microlens

Development of Tracking and Focusing Micro Actuators for Dual-Stage Optical Pick-Up Head

Two-dimensional Silicon-on-glass Actuator Combined with a Dispensed Polymer Microlens

Biomimetic optical system using polymer lenses with tunable focus

Compact Three-Axis Actuator for Positioning a Polymer Microlens in an Optical Pickup

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Zoom Optical System Using Tunable Polymer Lens

A Bio-Inspired Optical System with a Polymer Membrane and Integrated Structure

Comb-drive tracking and focusing lens actuators integrated on a silicon-on-insulator wafer

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Study on the Movement Measurement for an Objective Lens Actuator in Optical Pickup

Design, Fabrication, and Control of Components in Mems-Based Optical Pickups

Integrated Bi-Directional Focusing and Tracking Actuators in a Monolithic Device for a MEMS Optical Pick-Up Head

A novel micro optical system employing inclined polymer mirrors and Fresnel lens for monolithic integration of optical disk pickup heads

A Micro-Focusing Stage Applied to Optical Pick-Up Head

Integrated tracking and focusing micro lens actuators based on silicon bulk micromachining

Integrated Tracking and Focusing Systems of MEMS Optical Pickup Head

Electrostatic-Force-Modulated Microaspherical Lens for Optical Pickup Head

High-Sensitivity Actuator with New Magnetic Circuit in Optical Pickup

Compatible Optical Pickup Actuator for Next Generation Versatile Disc System