Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Large Scale, Flexible Organic Transistor Arrays and Circuits Based on Polyimide Materials

Controllable Self-Assembly of PTCDI-C8 for High Mobility Low-Dimensional Organic Field-Effect Transistors

Editorial: High-Performance Organic Thin-Film Transistors

High Density Three Dimensional Integration of Organic Transistors

Photo‐Curable Fluorinated High‐k Polyimide Dielectrics by Polar Side Substitution Effect for Low‐Voltage Operating Flexible Printed Electronics

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

Methyl Functionalization on Polyimide Side Chains as Gate Dielectrics for Organic Transistors

High Performance Biomass-Based Polyimides for Flexible Electronic Applications

Enhancing the Electrical and Thermal Stability of Organic Thin-Film Transistors by Utilizing Fluorinated Polyimide and Silicon Dioxide Bilayer Gate Dielectric

Polyimide (PI) High-Quality Polymer Dielectric Films with the Features of Anti-Solvents and Large-Area Consistency for Field-Effect Transistors

Solution-processed Organic Field-Effect Transistors with Cross-Linked Poly(4-Vinylphenol)/polyvinyl Alcohol Bilayer Dielectrics

Functionalization of Low‐k Polyimide Gate Dielectrics with Self‐Assembly Monolayer Toward High‐Performance Organic Field‐Effect Transistors and Circuits

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping

Facile Direct Printing of DPP-Based Polymers for Organic Field-Effect Transistors and Logic Gates

Recent Progress in Aromatic Polyimide Dielectrics for Organic Electronic Devices and Circuits

An organic field effect transistor based on ITO electrode and organic insulator layer

A high-performance organic thin-film transistor with Parylene/PMMA bilayer insulation based on P3HT

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

High-k Boron Nitride Sheets/Polyimide Hybrid Dielectric Layers for the Fabrication of Flexible Organic Transistors on Commercial Graphite Paper

A No-Hysteresis TIPS–pentacene:polystyrene Blend-Based Organic Field Effect Transistor by Extruded Direct Ink Writing and the Application in a Resistive Load Inverter Circuit

Diketopyrrolopyrrole-based small molecules for solution-processed n-channel organic thin film transistors