Abstract:For at least the past ten years printed electronics has promised to revolutionize our daily life by making cost-effective electronic circuits and sensors available through mass production techniques, for their ubiquitous applications in wearable components, rollable and conformable devices, and point-of-care applications. While passive components, such as conductors, resistors and capacitors, had already been fabricated by printing techniques at industrial scale, printing processes have been struggling to meet the requirements for mass-produced electronics and optoelectronics applications despite their great potential. In the case of logic integrated circuits (ICs), which constitute the focus of this Progress Report, the main limitations have been represented by the need of suitable functional inks, mainly high-mobility printable semiconductors and low sintering temperature conducting inks, and evoluted printing tools capable of higher resolution, registration and uniformity than needed in the conventional graphic arts printing sector. Solution-processable polymeric semiconductors are the best candidates to fulfill the requirements for printed logic ICs on flexible substrates, due to their superior processability, ease of tuning of their rheology parameters, and mechanical properties. One of the strongest limitations has been mainly represented by the low charge carrier mobility (μ) achievable with polymeric, organic field-effect transistors (OFETs). However, recently unprecedented values of μ ∼ 10 cm(2) /Vs have been achieved with solution-processed polymer based OFETs, a value competing with mobilities reported in organic single-crystals and exceeding the performances enabled by amorphous silicon (a-Si). Interestingly these values were achieved thanks to the design and synthesis of donor-acceptor copolymers, showing limited degree of order when processed in thin films and therefore fostering further studies on the reason leading to such improved charge transport properties. Among this class of materials, various polymers can show well balanced electrons and holes mobility, therefore being indicated as ambipolar semiconductors, good environmental stability, and a small band-gap, which simplifies the tuning of charge injection. This opened up the possibility of taking advantage of the superior performances offered by complementary "CMOS-like" logic for the design of digital ICs, easing the scaling down of critical geometrical features, and achieving higher complexity from robust single gates (e.g., inverters) and test circuits (e.g., ring oscillators) to more complete circuits. Here, we review the recent progress in the development of printed ICs based on polymeric semiconductors suitable for large-volume micro- and nano-electronics applications. Particular attention is paid to the strategies proposed in the literature to design and synthesize high mobility polymers and to develop suitable printing tools and techniques to allow for improved patterning capability required for the down-scaling of devices in order to achieve the operation frequencies needed for applications, such as flexible radio-frequency identification (RFID) tags, near-field communication (NFC) devices, ambient electronics, and portable flexible displays.

Facile Direct Printing of DPP-Based Polymers for Organic Field-Effect Transistors and Logic Gates

Nonhalogenated Solvent Processable and Printable High-Performance Polymer Semiconductor Enabled by Isomeric Nonconjugated Flexible Linkers

A Stable Solution-Processed Polymer Semiconductor with Record High-Mobility for Printed Transistors

Efficient Conjugated-Polymer Optoelectronic Devices Fabricated by Thin-Film Transfer-Printing Technique

Printing organic‐field effect transistors from semiconducting polymers and branched polyethylene

Enhancing the Solubility of N-Type Diketopyrrolopyrrole-Dicyanovinyl Molecules with Hybrid Siloxane Group for Solution-Processable Organic Field-Effect Transistor

High Mobility Amorphous Polymer‐Based 3D Stacked Pseudo Logic Circuits through Precision Printing

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

Toward printed integrated circuits based on unipolar or ambipolar polymer semiconductors

Directly Patternable, Highly Conducting Polymers for Broad Applications in Organic Electronics

Realizing Diketopyrrolopyrrole Polymer‐Based Uniform Large‐Area Transistors for Active Circuit via Protonic Acid Mediated Molecular Self‐Assembly

Polymer field-effect transistors with inkjet-printed silver electrodes: from device fabrication to circuit simulation

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Semiconducting Polymer Nanowires with Highly Aligned Molecules for Polymer Field Effect Transistors

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Design, synthesis, and application in OFET of a small molecule based on π-expanded fused diketopyrrolopyrrole

Direct-written polymer field-effect transistors operating at 20 MHz

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

High mobility diketopyrrolopyrrole (DPP)-based organic semiconductor materials for organic thin film transistors and photovoltaics

Novel Divinyl-Flanked Diketopyrrolopyrrole Polymer, Based on a Dimerization Strategy for High-Performance Organic Field-Effect Transistors

Diketopyrrolopyrrole Based Organic Semiconductor Materials for Field-Effect Transistors